 |
|
|
|
 |
|
|
|
Tacoma ARB Bull
Bar
You won't find a more thoroughly designed and manufactured
vehicle protection system than an ARB bull bar. Each bull
bar originates from premium, cold rolled sheet steel. Computer
controlled laser cutting equipment, mandrel bending machines
and MIG welders are used to shape the materials into a structurally
sound shell. Additional reinforcements are added, as are steel
uprights and cross bars. Bull Bars come ready to install a
number of winches. Includes all necessary high grade mounting
hardware, brackets, indicator lights and installation instructions.
Comes with a Satin Black Powder-coat Finish.
Note: Bull Bars ship truck freight and prices start at $75
to a commercial business address and $135 to a residential
home address.
95-04 Tacoma
Price: $739.00
05+ Tacoma
Price: $819.00
|
|
|
|
LRT 2005-2008 3" Leveling/ Lift Kit for Toyota Tacoma
Transform your 2005-2008 Toyota Tacoma! Turn your Tacoma into a head turner, and still retain the factory ride. Unlike other lifts available on the market that make you disassemble the strut assembly for installation, this leveling kit is designed to fit on top of the strut. Why do we do it this way? Because the other lifts pre-load the spring, making your ride harsher- and they are more difficult to install. Many people who have installed the in-the-strut poly spacers in the past have come to us and asked us why their poly spacers are squeezing out of the strut assembly...its because other lifts aren’t designed to take that kind of abuse. You may ask, why don’t we make the spacers out of steel like all other leveling kits on the market? We have found that over time, the other "steel" sandwiched/ welded spacers will flex and the steel will rust, and the tolerances on the holes and components are not as tight as we would like. Over time, the other lifts would "pop" meaning the struts begin to move on the spacers. Aluminum used as a strut spacer has proven to be the best material, because it will not rust and has the best characteristics for a spacer of this size. We have done our homework here and come up with an easy to install lift (in 2-3 hrs), with more engineering and components than other lifts have. If you want a quality lift kit, at an affordable price- you have found it. Included in the kit is:
Solid CNC machined 6061-T6 Aluminum Spacers with pre-installed studs, and Nyloc nuts and washers to ensure that there will be no problems down the road.
-1" Solid Aluminum Blocks with a 3.5 degree taper to decrease driveline vibrations in the rear with *NEW* u-bolts.
-Differential Drop to keep those Constant Velocity Joint boots from tearing, and keeping those CV Joints from premature wear from the increased angle. We have installed other companies differential drops, and the spacers they include are too long, So we came up with the perfect spacer. When too large of a spacer is used, the differential mounting points have large factory washers that will hit the bushing mount on the differential- Causing metal to metal contact. We like to keep everything like it was designed- no noises, no squeaks, no problems.
-Skidplate drop spacers and longer factory style bolts. Why not include a "off the shelf bolt"? Simply put, when doing routine service, the bolts that are on the from the Factory are a 12mm head. Off the shelf metric bolts have a 13mm head....what the? Plus, the factory bolts make it easy to keep the bolt in a socket, unlike others for easy removal and installation. The bolt also has an extra large flange area to keep the bolt from sliding through the hole on the skidplate.
-Allows for up to a 33" Tire with the factory wheels, however most of the time the front mudflap does have to be removed with aftermarket wheel and tire combinations because of different offset.
2005-2008 LRT 3" Toyota Tacoma Leveling/ Lift Kit
Price: $249.00
Applications include: 2005-2008 Regular Cab Tacoma, Access Cab Tacoma, and Double Cab Tacoma
|
|
|
|
Extended 5 Layer Stainless Steel Brake Lines
Don’t buy the imitations! This 5 layer stainless steel line comes in eight great colors. When doing suspension lift you reduce the necessary slack needed to get the flex you want. Stretched lines can risk vehicle safety & possibly tear, leak or even burst. Longer Brake lines are need for most lift systems done on your Toyota. These lines are simply the most advanced brake lines available. These hoses have virtually no swelling like rubber lines so you stop when you want to. Something you want in all driving conditions! Hose assemblies comply with DOT regulations & are legal in all 50 states. Non-aging Teflon inner core will work with all brake fluids. Stainless steel outer braid provides added protection to the Kevlar and rubberized layers. One-piece crimp design end fittings are super strong & utilize standard brake fitting hardware.
Specs: 20" Long for '95-'04 Tacoma, 22" Long for '05-'08 Models, Standard 3/16" Size, Operating Pressure is PSI 1750, Burst Pressure is 7000 PSI, Bend Radius is 2.0", Available in 8 great colors as pictured: Smoke, Clear, Yellow, Purple, Orange, Blue, Red, and Green.
95'-04' Tacoma Single Extended Rear Braided SS Brake Line
Price: $28.00
05'-08' Tacoma Double Extended SS Brake Lines, 22" Long
Price: $56.00
|
|
|
|
Old Man Emu Nitrocharger
Front Struts and Rear Shocks
Australia's unique driving conditions call for a different
approach to shock absorber design. Invariably, vehicles are
heavily loaded, fitted with accessories and driven on harsh
Outback roads for prolonged periods. When developing shock
absorbers, Old Man Emu takes all these factors into consideration.
This is reflected in the superb structural integrity of Nitrocharger
shocks, along with the fact they are properly valved for the
conditions they will be required to work under.
This experience in setting the most appropriate valving is
what really sets the Nitrocharger apart from its competitors.
OME engineers have extensive knowledge in this field as they
specialize in nothing else but 4WD suspension systems. When
developing a shock absorber, consideration is given to both
original equipment and OME springs. In many cases, several
shock absorber applications will be listed for one vehicle
to ensure the proper match regardless of spring selection,
installed accessories or load carrying requirements.
While OME Nitrochargers will improve overall ride performance
when fitted with standard springs, more substantial benefits
can be achieved when fitted in conjunction with OME springs.
Improved ride, load carrying characteristics, and wheel travel
are all benefits of such a combination.
Built in Australia and used by 4 wheelers throughout the world,
OME Nitrochargers set the standard in ride comfort over any
terrain and simply outperform the competition.
Front Strut (N91S)
Price: $115.00
each
Rear Shock (N85)
Price: $82.00
each
|
|
 |
|
Superlift TRUSPEED
Speed Sensor Recalibrator
The 1992 through 2005 Tacoma is equipped with an electronic
speedometer that uses a sensor to read vehicle speed rather
than a mechanical cable. The speed signal is also a big factor
in the overall performance equation. When tire height and
/ or axle gearing is altered, the vehicle's Engine and Powertrain
Control Modules receive an erroneous speed signal. This translates
into subtle, yet real reductions in performance and fuel economy.
Our TruSpeed calibrator addresses all speed signal-related
problems; it doesn't just correct the speedometer. How? The
TruSpeed module installs in-line with the factory electronic
speed sensor and converts the wrong speed signal into the
correct one for your vehicle's new tire and / or axle gear
ratio combination. Because the signal is altered at its source,
all speed-sensitive vehicle systems will receive the correct
speed data, which restores all proper functions.
Price: $189.00
|
|
 |
|
95-01 Tacoma Flex-A-Lite
Electric Fan
If your looking to add a bit more horses back to you engine
and want to keep things cool and running smooth, this is the
add-on you need. Flex-a-lite has been a long time trusted
electric fan producer and did not skimp when designing this
application specific fan. Includes two 12" fans turning
at 2000 RPM. Each fan has 10 blades at 21 . Pulls an incredible
2500 CFM while only pulling 19.5 amps. Comes with and adjustable
180 -240 thermostat and A/C relay. An optional manual override
switch may also be ordered to shut down the fan for those
water crossings or muddy situations.
VIEW
INSTALL INSTRUCTIONS
Electric Fan
Price: $365.00
Override Switch
Price: $20.00
|
|
 |
|
Tacoma Welded Rock
Sliders
Fully welded Rock Slider kits for Tacoma Extra-cab Pickups.
Made from 1 3/4" X .120" wall Tubing. Includes 4
legs with gussets on each slider. We recommend welding bars
directly to the frame. Fits 1995-2003 Tacoma Extra Cab, Double
Cab and Prerunner models. Unpainted metal finish.
Alternate mounting: Each gusset has a series of holes. These
holes can be used to mount the sliders using self tapping
screws. To use this method, new holes would need to be drilled
into the frame by the installer. Screws can then be installed
from the sliders, into the frame. Screws not provided and
we recommends that the sliders be welded into place for maximum
strength. 78" long.
Price: $284.05
|
|
 |
|
Unwelded Tacoma
Rock Sliders
Rock Sliders are a great way of protecting the rocker panels
of your Tacoma pickup or 4Runner. Heavy duty design can take
a pounding from the rocks while keeping body damage to a minimum.
Strong enough to take the entire weight of the truck. A high-lift
jack can be used anywhere along it's length for repositioning
of rig or axle servicing. Sold in pairs. Made from 1 3/4"
X .120 round HREW tubing. Bars come with the outer section
welded but the legs are not attached. Legs are pre-notched
and can be cut to length to allow for different mounting positions.
58" length include 6 frame legs for the short bed single
cab Tacoma. 78" length includes 8 frame legs for the
extra cab or double cab Tacoma’s. Rock Sliders ship
unpainted, we recommend painting bars after installation.
58" Sliders
Price: $128.25
78" Sliders
Price: $137.75
|
|
 |
|
Rock Slider Gusset
Kits
Our gusset kits include plates for the frame and triangle
corner gussets. Plate welds to frame and rock slider welds
to plate. Kits are made from 3/16" plate steel. 58"
kits contain 6 plates and 6 gussets. 78" kit includes
8 plates and 8 gussets.
6 Plates
Price: $18.05
8 Plates
Price: $22.80
|
|
 |
|
99-04 Tacoma Airaid
"MIT" Modular Intake Tube
The MIT will wake up even the tamest of engines. This is possible
because the MIT flows up to 400 cfm more air than the factory
unit. Constructed of cross-linked high density polyethylene
for strength and durability. All MIT kits are complete with
all the mounting hardware needed. Like the AIRAID Intake Systems,
they bolt right on in minutes with simple hand tools.
Price: $99.00
|
|
|
|
|
95-02 Tacoma PowerAid
Throttle Body Spacer
Bolt On Horsepower! The PowerAid Throttle Body Spacers from
AIRAID Premium Filter Company are designed to greatly improve
the low-end torque and horsepower characteristics of your
engine. PowerAid accomplishes this by spacing the throttle
body one inch and adding a dyno-proven Helix style bore. As
the intake air passes through the spacer, the Helix bore creates
a vortex action that improves atomization creating a more
complete combustion and an efficiently burning engine. The
results are improved drivability and increased fuel efficiency.
The PowerAid spacer is 50 state legal, will not void your
new car warranty, and can be used with any grade fuel.
95-02
Price: $105.00
03-04
Price: $105.00
|
|
 |
|
Tacoma K&N Replacement
Air Filter
K&N’s lifetime replacement air filters are designed
to increase horsepower and acceleration while providing excellent
filtration. This filters is custom designed to fit into your
existing factory air box. The drop-in design means adding
performance is simple. Simply remove the disposable air filter
and replace it with a K&N. Comes with K&N’s
famous Million-Mile Limited Warranty and will be the last
air filter your vehicle will ever need.
Price: $39.00
|
|
|
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
){kind=spacer}
){kind=spacer}
)
