Suzuki Samurai Full Shock Mount Kit

Rating:
0% of 100
$273.86
25 In Stock
SKU
Suzuki Samurai Full Shock Mount Kit

Suzuki Samurai Full Shock Mount Kit

The Low Range Samurai Full Shock Mount kit combines our front  upper weld-on shock towers, rear upper bolt-on shock mount, and 4 lower weld-on shock mounts all in one easy to order package. ts. 

These allow the use of allow the use of  common 5/8"-eye style shocks and both front rear.  Using our front mount system you will be able to run up to a 10" longer shocks than with factory mounts. 

The 100% bolt-on rear upper shock mount allows 3 choices of shock placement.  Using an in-board setting on the top mount allows for extended travel will sacrificing some road stability.  Choose a setting that best fits your style of driving.  Note: if you run a modified exhaust system, this mount may interfere, but modification of the shock mount can typically be made to avoid interference.

These lower shock mounts are a must have for a lifted Samurai.  They are constructed of 3/16" thick CNC laser cut steel plate and have replaceable studs.  The stud fits common 5/8" eye-style shock bushings. The mounts do not hang below the axle tube bottom, which contributes to better ground clearance. These lower mounts are simply the best on the market.

Purchase just the mount kit or with a set of our ES3000 series shock for even more savings. 

Kit is available with 4 Pro-Comp ES3000 shocks which we recomend when using our 4.5" Spring-Over Axle Kit. 

  • Front shocks (EXP326500) measure 18.59" Extended and 11.70" Collapsed.
  • Rear shocks (EXP318509) measure 27.07 Extended and 15.94" Collapsed.

Samurais with more extensive suspension upgrades will likely need custom shock measurements. 



⚠ WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • Lower Shock Mounts made from CNC Laser Cut from 3/16" Steel
  • Front Towers are laser cut from 1/4” HRPO steel and CNC press bent for accuracy

"With Shocks" option includes 4 Pro Comp ES3000 Shocks

  • Front shocks (EXP326500) measure 18.59" Extended and 11.70" Collapsed
  • Rear shocks (EXP318509) measure 27.07 Extended and 15.94" Collapsed

1986-1995 Suzuki Samurai

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, CA 93727.
  • Please place a clearly marked copy of the original invoice inside the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 Low Range Off-Road. All Rights Reserved.