Samurai Brakes
Everything you need to get your rig stopped on a dime. |
 |
|
|
 |
Coated Stainless Steel Braided Brake Lines
Great quality brake lines at a lower cost! In the past the steel brake line was something to stay away from put with new technology that is a thing of the past. These steel braided brake lines are 21" long and are DOT approved. The line is a multi layer design that also hase a rubberized coating on the outside to prevent wear.
Mounts to factory locations for a quick and easy install.
Choose from the four line kit for the dual brake line setup on the 85-88.5 Samurai’s, the Three Line Kit for the single brake line setup of the 88.5-95 Samurai’s, or purchase them individually.
Four Line Kit
Price: $85.00
Three Line Kit
Price: $65.00
Individual Line
Price: $22.00
|
|
 |
|
Spidertrax E-brake Kit
The most powerful aftermarket e-brake system available for
the Suzuki Samurai. This bolt-on kit equips the Samurai with
a drive line mounted e-brake system. Over 30% more holding
power then the OEM drum style e-brake. And unlike the OEM
drum style e-brake, this kit provides amazing holding force
in both forward and backward motion. You will want this if
you are installing any disk brake kit, lengthening your wheelbase,
or installing Toyota axles.
Price: $233.65 |
|
 |
|
Spidertrax Disk Brake
Kit
Got that grinding noise in the rear? Don’t just replace
those old brake shoes! The Spidertrax Disc Brake Kit is a
bolt-on solution for running rear Suzuki Samurai disc brakes.
This kit gives the Samurai superior braking power, critical
when running oversized tires. In addition, the serviceability
of the rear axle is greatly improved. This kit is the only
aftermarket conversion built around Suzuki OEM components.
All you need is a set of front Samurai rotors and calipers.
You will also need the caliper mounting bracket from the Samurai that
the caliper bolts to and holds the brake pads.
NOTE: You must also install a proportioning valve and set
it properly. The stock proportioning valve is not sufficient
for this conversion. The Brake line kits bellow come with
this valve or you can purchase them separately.
Price: $189.95 |
|
 |
|
Trail Tough Rear Disc Brake Kit
Trail Tough's new disc brake kit features the use of Subaru Caliper with e-brakes built right in. This makes a driveline e-brake unnecessary. Comes with all needed parts to bolt up Stock Samurai front rotors as well as the calipers, cables, and hardware from the front of an '80 to '82 Subaru Sedan. You will have to source these items on your own.
Price: $249.00 |
|
 |
|
Trail Tough Economy
Disk Brake Kit
This basic kit includes the pieces necessary for the do-it-yourselfer
to put stock Samurai front calipers and rotors on the rear
of your Samurai.
NOTE: You must also install a proportioning valve and set
it properly. The stock proportioning valve is not sufficient
for this conversion. The Brake line kits bellow come with
this valve or you can purchase them separately.
Price: $99.00
|
|
 |
|
Spidertrax Brake Line
Kits
If your installing the disk brake kit, you will want these.
These custom tailored brake lines will ensure proper installation
and performance of the Spidertrax Disc Brake Kit. This kit
comes complete with rear brake lines and a proportioning valve
setup to set your rear disc brakes correctly. Choose from
the dual brake line kit for 85-88.5 Samurai’s or the
single brake line kit for the 88.5-95 Samurai’s.
Price: $99.00 |
|
 |
|
Spidertrax Proportioning
Valve Kit
Running a rear disc brake conversion requires a proportioning
valve setup. This kit, designed for the Suzuki Samurai, is
bolt-on requiring NO cutting or flaring of existing brake
lines and includes the dial type proportioning valve. Also
included are detailed calibration instructions. Choose from
the dual brake line kit for 85-88.5 Samurai’s or the
single brake line kit for the 88.5-95 Samurai’s. The
SSB Dial Type Proportioning Valve is also available separately.
Kit
Price: $71.20
Valve
Price: $47.45 |
|
|
|
|
Electric Brake Line
Lock Kit
These line locks have unsurpassed holding power which guarantees
to keep you from rolling at any angle. Check out the features
and you will see what sets it apart from the rest. Including
the price on the best selling Line lock on the market!
•Completely rebuildable solenoid
•Designed to operate under extreme
heat for optimum durability
•Built in mounting tabs
•Hi-flow inlet / outlet ports
•Withstands 3,000 psi line pressure
•Each unit is individually tested and
backed by a 1 year warranty.
•Comes with accessory kit that includes
fuse, indicator light, and high quality switch
Price: $55.98
Note: This
part is intended for off road use only. A full charge on your
battery at all times is a must. If battery drops bellow about
9 Volts the brakes may disengage and can lead to possible
injury or death.
|
|
 |
|
Jamar Push Button Line
Lock
This hydraulic lock uses the line pressure of the system to
hold your brake locked, no electrical or special linkage required.
Just step on the foot brake, push the park lock down, let
off the foot brake and its locked. Step on the foot brake
again and it opens automatically. Holds any vehicle with hydraulic
brakes where you put it. Also with the park lock set it removes
all pounding on ring and pinon gears when tailoring a vehicle.
Made for use with silicones and DOT 3 fluids.
Price: $32.95 |
|
 |
|
Front Brake Pads
When it comes to safety and brakes, we don't fool around.
You need safe brakes, but why spend lots of money to get them?
Low Range offers our high quality semi- metallic brake pads
at a great low price. Comes in sets of 4 pads to do your whole
front end.
86-93
Price: $19.00
94-95
Price: $19.00 |
|
 |
|
Brake Rotors
Stock replacement rotors for the front of your 1986-1995 Samurai.
Price: $19.00
each |
)
)
)
)
)
)
)
)
)
)
)
)
