Samurai Armor
Keep your internals and body intact with our large selection of upgraded sliders, sliders and guards. |
 |
 |
 |
HD T-case Cradle
This New Tcase Cradle is a must for you case if your running lower gears. Not only is is a skid but it grabs on to several extra mounting points to make your case tough as nails. This cradle features fully welded, precision laser cut design and includes cutouts to ease draining and changing the gear oil. Complete kit comes with entire cradle mount, and needed hardware for mounting it up.
Price: $189.00
|
|
 |
"Mighty Kong"
Transfer Case Mount / Skid Plate
We are proud to carry the "Mighty Kong" made by
Trail Tough. It is by far the most popular combination transfer
case mount, bucket and skid plate made for the Suzuki Samurai.
This extreme-duty unitized design will not flex or distort
and actually adds strength to your case. It provides protection
where you need it - not where you don't and weighs only 12
lbs. It is also designed to accommodate drum or disc e-brake
upgrades.
Price: $189.00 |
|
|
|
Rock Sliders
ShrockBars are the ultimate in both protection and great looks for your Samurai rocker panels.
The most vulnerable area on any vehicle while off-roading is your rocker panels. ShrockBars will blanket your rockers with 1/4" thick plate steel and .120 wall 1.5" tubing. You’ll never worry about them again! ShrockWorks rock sliders look great on your Sami too. They are tucked up nice and high and the ends are cut to flow around the factory fender flares.
With ShrockBars installed, protecting the rocker panels doesn’t have to mean giving up ground clearance. Unlike traditional frame mounted tubular sliders, you will not loose ANY ground clearance. The side tubes are great for fending off blows from the side which happen frequently when sliding into objects. You can put the tube on a rock, turn into it, and pivot right around it. As a bonus, the tube portion also functions as a handy step up. ShrockWorks rock sliders also allow you to use your Hi-Lift jack on the side of your Samurai without damaging it.
Samurai Rock Sliders are precision fabricated from laser cut plate steel and bent on a CNC press brake for a perfect fit and sharp appearance.
The new Double Mounting system has eight mounting points through the body (six along the side and two from underneath) plus two through the frame. They are now compatible with all aftermarket suspension systems we are aware of. The new mounting system will also work with a 1" body lift w/o a modifications and with slightly modification can be made to fit with a 2" body lift.
Installation is straight forward and requires only basic hand tools and a drill. Detailed instructions provided.
Shipped ready to paint or can be Powder coated. 37 pounds each.
Sliders are built to order and are usually on at least a 3 week turn around. Please call to check current availability.
Price: $265.00
Powder Coat
Price: $55.00 |
|
 |
"Bad Boy"
Nerf Bars
Take a thrashin' and keep on bashin'. These bars made by Trail
Tough provide superior off-road protection not only for the
bottom of the rocker panel but the sides of the vehicle as
well. Comes with both bars and all hardware needed.
Price: $269.00 |
|
|
|
Trail Slayer Series
Tube Doors
Your rig will look great with these Heavy duty 1.5" .120
wall construction tube doors. Uses OEM hinges
for easy mounting and comes uncoated so you can paint them
any color you want. Kit comes with 2-stage slam latches
for a hassle free closing every time.
Price: $349.00 |
|
|
|
Desert Runner Tube Doors
The Desert Runner Fabrications tube doors provide protection from rocks, trees, most bushes and debris, while still having the open-air feeling and visibility of wheelin without the stock doors. Made from 1.25 in.x .120 hrew tubing they can take a hit. Made for the user to final fit to their vehicle,the hinges and latches are shipped loose from the door for a perfect fit(welding required). Our hinges and latches work with your stock door hinges(after they are cut for quick release doors)and the stock door strikers.
Shipping weight-24lbs 4.4oz
Price: $199.00 |
|
|
|
Trail Slayer Series
Tube Front Clip
This will certainly turn heads! This complete bolt-on three
piece kit uses Heavy Duty 1.5" .120 wall tubing
construction design for maximum hood and radiator protection
as well as tire clearance. Mounts to factory door hinges
in the rear and factory front body mounts under your grill
in the front. Includes Zinc grill and 2 stage hood latch.
Because of the 3 piece design this kit is able to ship UPS
and is a direct bolt-on with no welding required. Just
unwrap, paint and bolt on.
Price: $595.00 |
|
|
|
Trail Slayer Series
Rear Fiberglass Tub Cap
These Strong fiberglass tub caps have the same radius
and body lines as the Samurai to provide a finished appearance
for your buggy style build. Comes in bare white fiberglass
so paining to match is a breeze. Includes rivets and
templates to properly cut your body for fitment.
Trail Slayer series cage available soon!
Price: $329.00 |
|
|
|
Rock Barz
Introducing the "Rock Barz." This heavy duty steel
bar protects from wheel well to wheel well and includes polyurethane
end caps. Powder coated black. The Rock Barz can also come
sporting an aluminum diamond plate non-skid entry step as
shown in picture, black powder coated diamond plate non-skid
entry step or you can order your with no step. This product
is definitely built to last!
With Either Step
Price: $299.00
With No Step
Price: $229.00 |
|
 |
Nurf Bars
These 3" tube bars made by Calmini offer side rocker
panel protection, good looks and functionality. Nurf can be
used as a step into the Samurai as well. Designed to run with
30" or smaller tires. Rubbing will occur with larger
tires unless the front axle is moved forward. Kit comes complete
with two nurf bars, hardware and installation instructions.
Installation is entirely bolt-on.
Price: $139.00 |
|
 |
Rocker Bars
These heavy duty 2"x2"x3/16" square tubing
rocker bars made by Calmini are built to take a beating on
the trail! They feature fully welded and smoothed end caps
for a clean look and heavy duty gusseted frame mounts. A Samurai
used in any kind of hard core off-road situation will see
a caved in rocker panel. This fixes that! Complete kit includes
two rocker bars prepped and ready to be welded to the frame.
Price: $119.00 |
|
 |
Formed Rocker Panel
Skids
These all new Calmini built formed rocker panel skids for
the Samurai are the new standard for off-road rocker protection.
These custom formed skids are stronger than individual rocker
panels or rocker bars as they protect the entire side, not
just underneath as well. Installation is bolt-on with minor
drilling required to strengthen the unit. Complete kit comes
with two formed rocker skids, spacers, hardware, and installation
instructions.
Price: $229.00 |
|
 |
Desert Runner Rocker Guards
Made from 1.5 in. x .120 hrew tubing, they are designed to be welded on for maximum strength when you need it. Our rocker guards protect the rocker sill itself and the verticle rocker just below the door. These rocker guards are designed to take a hit,and can support the entire weight of the vehicle. Main and upper rails come fully welded,while the stringers come notched on one side and prepped for you to weld on for your exact fitment. Easy to follow instructions and gussets are included for easy installation.Some modifications to your vehicle may be needed if your truck uses aftermarket flares.
Shipping weight-37lbs 0.8oz
Price: $199.00 |
|
|
|
Rock Biters
The new Rock Biters for Samurai side panels are the ultimate in protection. They are made with 1/4" cold rolled flat plate steel that is CNC punched for close tolerances then folded on a 100 ton press. Heavily welded at the exterior seams. The Rock Biters are a one piece side design and made to be the strongest rail ever designed. They look sharp with or without the Samurai fender flares. They were designed to fit around the factory plastic trim bracket so removal of that bracket is not necessary for a quick installation. A complete bolt kit is provided but welding is recommended.
Ships raw steel so you can paint them any color you wish. (View Install)
Price: $229.00 |
|
|
|
| Gas Tank Skid
Replace that flimsy stock gas tank skid plate with something
that can shrug off some serious abuse! The stock Samurai skid
plate is notorious for becoming easily dented and rusting
out. Your gas tank is the last thing you want to have bashed
in or torn open by rocks or tree stumps!
The ShrockWorks Samurai gas tank skid plate is constructed
of 37lbs of 3/16" thick plate steel, laser cut and precision
bent for a perfect fit. The ShrockWorks logo is laser cut
on the back.
Your gas tank never had it so good, cradled in serious protection
and a great looking hunk of steel!
Shipped ready to paint or can be Powder coated.
Price: $145.00
Powder coat
Price: $35.00 |
|
 |
DIY Transfer Case
Bucket
A great way to guard your t-case from rocks. Made by Rock4x
and comes to you in only three pieces, you fold up easily
along the grooved lines and weld it up. It utilizing your
own OEM or aftermarket t-case arms. It also ties your t-case
mounting arms together, which strengthens the entire case.
Note: Some minor grinding is needed on some applications.
Price: $115.00 |
|
|
| Differential Guards
These diffguards are not your ordinary pipe cap. Laser cut
and formed from one piece of 3/16" steel. Design allows
for easy cleaning of packed mud with open lower corners, as
well as allowing easy installation and removal of the fill
plug. Made to fit either your Samurai Axles or those with
Toyota axles. Weld on kit.
Price: $35.00
each
|
|
 |
Differential Caps
These Caps made by Trail Tough are bullet proof protection
for your diffs without decreasing ground clearance. Designed
to fit your stock Samurai housing front or rear and also fits
the Samurai/ Sidekick hybrid housings.
Sold as Pairs.
Price: $55.00 |
|
 |
Crabs Diffgurads
The new Crabs for Samurai are a great design. They are made with 1/4" cold rolled steel folded on a 100 ton press to take any abuse you put them through. Laser cut for close tolerances. They were designed to allow openings for stock E-brake cables, brackets and brake lines. Weld-on.
Price: $32 each
|
|
 |
Transmission/Transfer
case Skidplate
Protect your investment! This heavy duty skid plate covers
the underbody of your Samurai from frame rail to frame rail.
It completely covers the transfer case and rear half of the
transmission. Installation is easy with four "J"
hanger bolts (included). Easily removed for transmission and
transfer case servicing. Comes Zinc Coated.
Price: $110.00 |
|
 |
Suzuki Samurai Full
Skid Plate
This steel belly pan is tough and allows your Zuk to slip
over the big rocks without hanging up or damaging your frame,
exhaust or vital components. The positive mounting design
eliminates any J-bolt or thread damage.
Made by Trail Tough
Price: $139.00 |
|
 |
Windshield Wiper
Braces
Take a look at your windshield frame, at the passenger wiper,
do you see a crack forming, its not to late, get our braces
ASAP and prevent having to buy a new windshield frame. Laser
cut from 18 Gauge #8 stainless steel. Included is stainless
hardware, 3m adhesive backing , 3/32" drill bit, and
instructions. Available in Black Powder coat by special request.
Kit comes with both sides and is available for both the Soft
and Hardtops.
Price: $29.00 |
|
 |
Axle Trusses
Axle trusses will help prevent the dreaded sag, so prone to
lifted and over worked Suzuki Samurai axles. Constructed of
1/8th inch steel, formed and laser cut, with the Suzuki
"S" logo. No grinding or fitting is needed, just
hold on and weld. Because the Samurai axle is a bit thinner,
you can install one on top as well as the bottom. This is
also good for bigger engine swaps with lower oil pans, you
can install one on the bottom only if needed. Weld-on.
Price: $23.00
|
|
 |
Rear Diamond Plate
Corners (Pre-bent)
Protect that rear corner. These diamond plate corners for
your Suzuki Samurai can enhance the appearance of any vehicle.
Also made of #3003 aluminum treadbrite, these corners not
only look good, but are long lasting and very durable. Unlike
chrome, they will never peel, flake or rust. Pre-bent and
welded to form fit. Comes with rivets for an easy install.
Comes in standard diamond plate as pictured or heavy duty
black powder coat. Kits comes with both sides.
Soft-top
Price: $89.00
Soft-top Powder Coat
Price: $113.00
Hardtop
Price: $89.00
Hard-top Powder Coat
Price: $123.00
|
|
 |
Diamond Plate Rockers
Still got those plastic rockers under the doors? GET THEM
OFF! They are nothing but rust traps. They collect water and
after a while you have nothing left underneath them. These
Diamond Plate Rockers are just what you need. If you already
have the rust starting, these are the perfect coverup. They
look great and give great protection. Curls under bottom corner
about an inch also. Comes in either standard diamond plate
or powder coated black. Kits comes with both sides.
Price: $75.00
Powder Coated
Price: $99.00 |
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
