Shop By
Shopping Options
Price
$0 $361 $0 to $361
Manufacturer
  1. (18)
  2. (4)
  3. (1)
  4. (2)
  5. (1)
  6. (1)
  7. (1)
  8. (1)
  9. (1)
Show Less Show More

Tools


  1. 5-1/2" Jack Extension

    5-1/2" Jack Extension

    $59.00

    These 5.5” Jack Extensions are designed to work with Craftsmen 2-ton Jacks but fit most floor jacks on the market and drop into the center pin hole. These provide for a sturdy base that are safer to use than that block of wood that you know you shouldn't use!

    Learn More


  2. Dial Guage Angle Finder

    Dial Gauge Angle Finder

    $7.99
    Need a tool to find your axle pinion angle? These inexpensive angle finders will do a good job at finding where your spring pads need to be welded. Learn More


  3. Telescoping L Wrench by Pro Comp (PXALWRENCH)

    Telescoping L Wrench by Pro Comp (PXALWRENCH)

    $27.99
    Telescoping L Wrench by Pro Comp (PXALWRENCH) Learn More


  4. 1/2" High Speed Steel Drill Bit, 1/2" Shank

    1/2" High Speed Steel Drill Bit, 1/2" Shank

    $5.98
    If you need a great quality and inexpensive drill bit to do a variety of jobs, this is the ticket. We buy in bulk to save you money... go to a hardware store- most 1/2" drill bits you can find are at least $10.00! Learn More


  5. Brake Bleeder Bottle (ALL11019)

    Brake Bleeder Bottle (ALL11019)

    $13.75
    Contain the mess of bleeding brakes with this handy tool from All Star. This 16oz. bottle come with an attached lanyard, making securing the bottle around a chassis or suspension part a breeze. A 15" long hose fits most bleeder screws and the screw-off cap has a built-in fitting to secure the bleeder hose during storage, helping to prevent spills. Learn More


  6. Large Flex Joint Adjustment Tool (TOOL-FJ-LG)

    Large Flex Joint Adjustment Tool (TOOL-FJ-LG)

    $15.00

    Low Range Off Road is your source for the adjustment tool for all of our Large Flex Joints, both weldable and billet. This tool is CNC Machined and works with a 1/2" drive ratchet or extension for truly an easy way to adjust your joints.

    Learn More


  7. SPC Off Road Fastrax Alignment Camber / Caster / Toe Guide, Fits 13-18" Wheel and up to 44" Tires (91025)

    SPC Off Road Fastrax Alignment Camber / Caster / Toe Guide, Fits 13-18" Wheel and up to 44" Tires (91025)

    $328.48

    This great tool is a must for your garage or shop. Portable, hands-free alignment can be done quickly and easily. • Extended toe arms make it easy to measure toe on all off road tires.

    Learn More


  8. 2 X 1 Gallon Coolant, Anti-Freeze, Gear Oil, Hydraulic Fluid Carrier, Trail-Gear (300741-KIT)

    2 X 1 Gallon Coolant, Anti-Freeze, Gear Oil, Hydraulic Fluid Carrier, Trail-Gear (300741-KIT)

    $74.50

    Tired of having fluids bouncing around in the back of your truck, buggy, and/or off-road vehicle? Our TG 2-Gallon Carrier is your solution to this problem. The TG 2-Gallon Carrier organizes and secures gallon jugs of your automotive fluids.

    Learn More


  9. S&B Filters Precision II: Cleaning & Oil Kit, Red (88-0008)

    S&B Filters Precision II: Cleaning & Oil Kit, Red (88-0008)

    $29.95
    This is S&B Filters Cotton-Gauze type cleaning and oil kit. Use this to clean any cotton cleanable filter and save money! More cleaning solution and more oil for less. Learn More


  10. Axle bearing puller tool  (56065)

    Axle bearing puller tool (56065)

    $360.92

    This is an axle bearing puller tool.  Rather than beat your axle against the floor, these slide onto the axle and bolt onto the bearing pocket.  You then clamp the upper plate into a press and press down on the axle itself.  It makes for a very simple removal of the axle bearings and saves an enormous amount of time and energy. 

    Learn More


  11. 18mm Drill Bit (DIY-DRILL18MM)

    18mm Drill Bit (DIY-DRILL18MM)

    $20.69
    These are sometimes hard to find, and if you are doing your own Toyota project with leaf springs or making your own brackets for 18mm creeper joints- you may need this to get the job done. We special order these and stock them so that you can add it to your order without chasing them down. Learn More


  12. 1/2" Drive Female to 3/4" Drive Male Socket Adapter (TOOL-1/2-3/4-ADAPT)

    1/2" Drive Female to 3/4" Drive Male Socket Adapter (TOOL-1/2-3/4-ADAPT)

    $7.80
    This is a 1/2" Drive Female to 3/4" Drive Male Socket Adapter. We use these when adapting to our 3/4" Hex Driver for Dana 60 King Pin Axles. (TOOL-1/2-3/4-ADAPT) Learn More


  13. 3/4" Drive, 7/8" Impact Driver for Dana 60 Kingpin (TOOL-3/4-7/8-ID)

    3/4" Drive, 7/8" Impact Driver for Dana 60 Kingpin (TOOL-3/4-7/8-ID)

    $16.50

    This is the socket we use when taking the kingpins out of a Dana 60 Kingpin Front Axle. 7/8" Sockets can be hard to find. We also have an adapter from 3/4" Drive to 1/2" to use with your more common 1/2" drive breaker bars.

    Learn More


  14. Brass Hammer 2LB (TOOL-BH2)

    Brass Hammer 2LB (TOOL-BH2)

    $35.99
    Brass hammers are perfect for sensitive steel that you do not want to mar or dent. Learn More


  15. 32 Piece Metric 3/8" Drive Impact Socket Set by Neiko Tools (02470A) (Default)Back  Reset  Flush FPCDelete  Duplicate  Save  Save and Continue Edit

    32 Piece Metric 1/2" Drive Impact Socket Set by Neiko Tools (02470A)

    $89.00
    A great set to start your tool collection. Or an excellent set to keep on your toolbox when out on the trail. Learn More


  16. D Ring Shackle Wrench Tool by Low Range Off Road

    D Ring Shackle Wrench Tool by Low Range Off Road

    $9.99

    Low Range Off Road is constantly thinking of ways to better an off road experience.  Sometimes when on the trail, we are fed up with trying to find a wrench or something to beat on our drings with to loosen them up.  So, we created a wrench to make the process much easier and safer.

    We have lost drings on the trail because they were not tightened after winching as well.... so we created the DRING Wrench!

    Learn More


  17. 1/2" Drive 27mm Impact Socket (Great For Samurai Transfer Case Flange Nuts)

    1/2" Drive 27mm Impact Socket (Great For Samurai Transfer Case Flange Nuts)

    $5.45

    These are new 27mm impact sockets that work great for installing or removing the Samurai Transfer Case Flange Nuts. Most people do not have a 27MM Socket, so we stock these for you!

    Learn More


  18.  Trail-Gear 2, 4 and 6 Quart Oil Carriers, 16 Guage Steel (300669-KIT, 300665-KIT, 300595-KIT, 300775-KIT)

    Trail-Gear 2, 4 and 6 Quart Oil Carriers, 16 Guage Steel (300669-KIT, 300665-KIT, 300595-KIT, 300775-KIT)

    Parts starting at: $37.00

    Tired of having quarts of oil & fluids bouncing around in the back of your truck, buggy, and/or off-road vehicle? Our TG Oil Carriers are your solution to this problem. The TG Oil Carriers organizes and secures quarts of your automotive fluids.

    Learn More


  19. Suzuki 2" Spindle Nut Socket, Wheel Bearing Nut

    Suzuki 50mm / 2" Spindle Hub Nut Socket, Fits Samurai, Sierra, SJ410

    $24.95

    Handy tool to have for making your Differential job smooth and axle swaps a breeze. Better than the old chisel and hammer way of doing things!

    Learn More


  20. Toyota FJ80 Tie Rod End Taper Taps M23-1.5

    Toyota 23MM FJ80 Tie Rod End Taper Taps M23-1.5

    Parts starting at: $26.52

    Low Range Off Road is trying really hard to get you the tools you need to do things on your own.  We looked long and hard for an inexpensive tap for the Toyota FJ80 Tie Rod End... problem is, no one makes it. You can find 22MM taps easily, but 23 is oddball. These are custom manufactured just for us. Learn More