Low Range Off-Road DOM Sleeved Bushing Kits

Rating:
% of 100
$24.00
100+ In Stock
SKU
Low Range Off-Road Sleeved Bushing Kits

Low Range Off-Road DOM Sleeved Bushing Kits

These Sleeved Bushing Kits from Low Range Off-Road are available in three sizes; they can be used in a variety of ways in your vehicle fabrication projects. Each kit contains two flanged polyurethane bushings that fit into both ends of a metal outer sleeve. A metal inner sleeve (to bolt the bushing to a frame link or other attachment) then runs through the axis of the two bushings. The inner and outer sleeves are made of 1020 Drawn Over Mandrel (DOM) steel.

The kits are available in a 2-5/8" mounting width (with either a 1/2" or 9/16" bolt hole) or a 3" mounting width with a 1/2" bolt hole. Mounting width is calculated from the outside flange of both polyurethane bushings when installed in the the outer sleeve.

The outer sleeve has a 2" O.D. and a 1/4" wall thickness. The 1/2" I.D. inner sleeve has a 0.120-inch wall thickness. The 9/16" I.D. inner sleeve has a 0.093-inch wall thickness. Inner sleeves are zinc-plated for corrosion resistance.

These kits can be used to make (among other things):

  • Control Arms
  • Crossmember Mounts
  • Hinges (e.g. for Tire Carriers)
  • Mounts for Transmissions or T-Cases
  • Panhard Bars
  • Suspension Links
  • Torque Arms
  • Traction Bars

Please Note: Polyurethane bushings must be removed before welding the outer sleeve. If they are not removed, welding heat will destroy the bushings!

⚠ WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • Available in 2-5/8" or 3" Widths
  • Polyurethane Bushings have a 2" O.D. Flange and a 1-1/2" O.D. Barrel
  • Outer and Inner Sleeves are 1020 DOM Steel
  • Outer Sleeve is 2" O.D. with a 1/4" Wall Thickness
  • Inner Sleeves are zinc-plated for corrosion resistance
  • 1/2" I.D. Inner Sleeve has a Wall Thickness of 0.120-inch
  • 9/16" I.D. Inner Sleeve has a Wall Thickness of 0.093-inch

Universal

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, CA 93727.
  • Please place a clearly marked copy of the original invoice inside the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 Low Range Off-Road. All Rights Reserved.