Shop By
Shopping Options
Price
$0 $314 $0 to $314
Manufacturer
  1. (6)
  2. (12)
  3. (1)
  4. (1)

Bracketry

This page has some of our bracketry available. For tabs, see the tabs page

  1. Toyota Traction Bar Axle Mount

    Trail Link Anti-Wrap Axle Traction Bar Mount (111333-1-KIT)

    Regular Price: $49.61

    Sale Price $47.25

    For those tackling the top trails and hardest lines, a track bar helps improve traction and responsiveness of the suspension system on the trail. Low Range Off Road is your source for the mounts and parts to get it done! Learn More


  2. Toyota Axle 4 Link Bracket

    Toyota Rear Axle Upper 4-Link Bracket Mounts (111261-1-KIT, 110116-1-KIT)

    Parts starting at: $135.45

    Need an upper link bracket for your custom 4-link setup? Look no further, we sell them separate from the 4 link kit. Learn More


  3. Rock Assault Housing Panhard Bracket

    Toyota Three Link Panhard Bracket, For use with Front Rock Assault Housing (110174-1-KIT)

    Regular Price: $99.23

    Sale Price $94.50

    Our Rock Assault™ Front Three Link Pan Hard Bracket will allow you to use your current Toyota Trail-Link Three™ Front 3-Link Kit with your new Rock Assault™ Front Axle Housing. If you are ordering the Trail-Link Three™ Front 3-Link Kit at the same time as you are ordering the Rock Assault™ Front Axle Housing, simply choose the correct option for the Rock Assault™ Front Pan Hard Bracket, not the OEM axle pan hard bracket. Learn More


  4. Trail-Link Three Front 3 Link Upper Link Frame Bracket

    Trail-Link Three Front 3 Link Upper Link Frame Bracket (110141-1-KIT)

    Regular Price: $137.81

    Sale Price $131.25

    This is the Upper Link Frame Bracket that attaches to the passenger side of the frame. The link goes on the inside of the frame. Learn More


  5. Trail-Gear Steel Reservoir Mounts, 2.0 or 2.5" (300269-KIT, 300270-KIT, 300652-KIT, 300653-KIT)

    Trail-Gear Steel Reservoir Mounts, 2.0 or 2.5" (300269-KIT, 300270-KIT, 300652-KIT, 300653-KIT)

    Parts starting at: $4.20

    These steel reservoir mounts are great for securing a shock reservoir, fuel pump, fuel filter, or almost anything else that has an O.D. of 2” or 2-1/2”. They can be welded on to almost any size of round tubing.

    Learn More


  6. Small Frame Outrigger, Frame Mounting Platform, Pair

    Small Frame Outrigger, Frame Mounting Platform, Pair

    $49.00

    If you are looking for an easy way to mount coils or bumpstops outboard of your frame, these are a great start. These are not drilled with a hole, so you have many options on what you can mount to them. Some mount 2.5" Coil Springs to them for their own coil spring setup. Some use them to mount rubber or polyurethane bumpstops to, or even leaf spring mounts, or even control arm brackets or mounts. They have a very broad usage.

    Learn More


  7. Adjustable Panhard Bracket, Inside Width of 1-3/4” and a 9/16” thru hole, Trail-Gear (300680-1-KIT)

    Adjustable Panhard Bracket, Inside Width of 1-3/4” and a 9/16” thru hole, Trail-Gear (300680-1-KIT)

    $43.11

    Due to recent customer demand Trail-Gear now offers an adjustable panhard bracket. Laser cut and formed in the USA using ¼” steel. Trail-Gear’s adjustable panhard includes four sets of holes to mount the panhard to give the user more freedom in mounting suspension. The center distance between the holes is 1-1/4” giving a total of 3-3/4” of adjustment. The bracket is shipped raw and un-welded so the bracket can be easily trimmed down to the desired length.

    Learn More


  8. Flat Top Weld-On Stinger by Trail Gear (303413-KIT)

    Flat Top Weld-On Stinger by Trail Gear (303413-KIT)

    $49.00

    Made out of 1.75" DOM CNC bent tubing that is coped to fit and weld onto a flat surface. 

    Learn More


  9. Filler Plug Kit w/ Steel Weld-In Bung 1 3/8" (ALL36161)

    Filler Plug Kit w/ Steel Weld-In Bung 1 3/8" (ALL36161)

    $19.99
    These Allstar Performance fill plug kits allow you to put a fill plug where you need it. Learn More


  10. Smiling Bottle Opener Tube End Caps (DIY-BOTEC)

    Smiling Bottle Opener Tube End Caps (DIY-BOTEC)

    $13.75
    Every wheeling trip deserves a happy ending. Learn More


  11. Trail-Link Three Front 3 Link Upper Link Axle Bracket

    Trail-Link Three Front 3 Link Upper Link Axle Bracket (110144-1-KIT)

    Regular Price: $35.28

    Sale Price $33.60

    This is the Upper Link Axle Bracket that welds on the axle housing for the upper link to attach above the differential. Learn More


  12. Trail-Link Four 4 Link Rear Crossmember (110128-1-K)

    Trail-Link Four 4 Link Rear Crossmember (110128-1-KIT)

    Regular Price: $329.65

    Sale Price $313.95

    You will need this crossmember if you are looking to put your own kit together. It is designed to fit between a frame width of 36.69". These have been used on Toyota Pickups, but have also been used on other models with modifications. Please note that using this on many models will require gas tank modifications and use of the rear cargo bed. Heavy modification is needed to retain the use of pickup bed. Learn More


  13. 20 Degree Lower 4 Link Axle Bracket (140224-1, 140225-1)

    20 Degree Lower 4 Link Axle Bracket (140224-1, 140225-1)

    Regular Price: $26.46

    Sale Price $25.20

    These are 20 Degree Lower Axle Link Brackets.  These are great for your own 4 Link Suspension setup.  Saves time and hassle in cutting your own tabs or bending your own steel.  Plus, they look great too! Learn More


  14. Panhard / Track Bar Bracket, Offset Axle Mount

    Panhard / Track Bar Bracket, Offset Axle Mount

    $28.00
    Are you looking for a heavy duty offset panhard / track bar bracket that can be mounted to the front of your axle? These are a great bracket to do such at an amazing price. Learn More


  15. Weld-On Light Bar Kit

    Weld-On Light Bar Kit (120209-1-KIT)

    $38.59
    This Weld-On Light Bar Kit is precision CNC bent from 1 3/4" x .120" wall, 1035 DOM tubing. The Trail-Gear Weld-On Light Bar makes a great edition to our stingerless bumpers, but can also be welded onto many different locations to mount and protect your lights. Learn More


  16. 2.5" Hole to Hole Length Small Shackles, 9/16" Diameter Hole

    2.5" Hole to Hole Length Small Shackles, 9/16" Diameter Hole

    $15.00
    These are shackles used for a variety of things. Most use them for traction bars on one end with a leaf spring vehicle. They have a 9/16" Hole and can be drilled out for a variety of uses. They make doing a custom job easier and building your stuff should be less expensive. Learn More


  17. DIY Toyota Gear Driven Transfer Case Crossmember Horse Collar Center Plate (TDT-CCP)

    DIY Toyota Gear Driven Transfer Case Crossmember Horse Collar Center Plate (TDT-CCP)

    $52.00

    We have requests for a way to bolt up your Toyota case when doing a not so common engine or transmission swap. This crossmember is made from 3/8" Thick material and bolts onto the back side of a RF1A Gear Driven Toyota Transfer Case.  Sometimes these are called Horse Collar crossmebers because they bolt onto the outside edges of the t-case. 

    Learn More


  18. Suzuki Samurai Leaf Spring Width Hangers

    Suzuki Samurai Leaf Spring Width Hangers

    $23.00
    In need of leaf spring hangers on your Samurai or doing a solid axle swap on your Sidekick using Samurai leaf springs? From the factory the shackle end is in the front on the Samurai. If you are doing a shackle reversal using Samurai springs, or if you are stretching the rear of a Samurai these may be needed if using Samurai leaf springs. These are the spring hangers to get the job done. The options are endless. These are to our specs because nothing else fits perfectly to the Samurai leaf spring and bushing width. Learn More


  19. Frame Outside Trackbar / Panhard Mounting Bracket

    Frame Outside Trackbar / Panhard Mounting Bracket

    $25.00
    These are made to withstand a lot of abuse. Made from 1/4" Thick steel plate and CNC bent, they work great for any do-it-yourselfer trying to mount a trackbar or panhard bar to your frame. Learn More


  20. Roll Cage Base Plates by Trail-Gear (304482-1-KIT, 304483-KIT, 304484-KIT)

    Roll Cage Base Plates by Trail-Gear (304482-1-KIT, 304483-KIT, 304484-KIT)

    Parts starting at: $2.99

    Trail-Gear base plates are designed to be welded to cage tube end to provide a strong mounting base. Learn More