IPF H-4 7" Round Headlamp Replacements
Upgrade your dim stock Samurai sealed seam headlamps with a set of IPF H4 Headlamps and a set of IPF bulbs to meet your needs. This headlight provides long lasting performance and brightness well beyond your stock headlights. These H-4 headlamps replace your factory headlight with a double coated lens 3/8" hardened polished glass for extreme strength against rocks and chips, and against high heat situations. The lens is prism and column cut. With the high precision lenses and reflectors the bulb is capable of reflecting 100% of the light it produces. An overall enhancement upgrade to any existing "stock" sealed beam headlight. H4 bulbs are not included with the headlights, install a standard H4 bulb or go with a high performance H4 upgrade bulb for an additional enhancement. These incredible lights turn the night into day when you are driving and provides a sharp cutoff which means these lights shine less into the eye of oncoming drivers than your factory lights, while providing a dramatic increase in nighttime visibility on the highway, and off to the shoulder. The very best H4 light available. Priced each.

Price: $30.00

IPF H4 Performance Bulbs
These High quality clear bulbs are available in different configurations and produce what they are rated at. Available in stock 55/60W bulbs, 80/110W High performance bulbs, or 100/170W bulbs designed specifically for race and off-road applications.
The higher wattage units (80/110, 100/170) are designed to be used high heat approved housings like IPF’s headlight replacements (above) and with IPF Performance Wiring Looms (below). Note: The higher heat output of the 100/170W bulbs can reduce life span. Price is for single bulbs.

Specs: 55/60W, 80/110W, 100/170W 3100K

55/60W
Price: $17.00

80/110W
Price: $34.00

100/170W
Price: $40.00

IPF H4 Magic J-Bulbs
IPF uses a high pressure exotic Xenon gas mix in the bulb. This new process gives illumination equal to 80W on low beam and 130W on high beam, while only using 55W low / 65W high draw from the vehicle electrical system meaning you do not have to replace your factory wiring harness. In addition to the super white output, IPF integrated a phosphorescent ring which produces a luminous blue glow for up to 15 minutes after the lights are shut off. Priced per pair of bulbs.

Specs: H4 12V 55/60W 3800K

Blue
Price: $61.00

IPF H4 X51 Fatboy Bulbs
The newest in high output bulb technology. Using a larger envelope than other H4 bulbs allows IPF to have nearly twice the volume of exotic gasses - boosting the light output of the bulb, while only drawing 80/60w meaning there is no need to upgrade your factory wiring harness. Output on this bulb is a equivalent to 190w low beam and 150w high beam. It may seem a bit backward but IPF engineers have determined that when using the H4 lens a precise placement of light will not blind oncoming drivers. The 'Fatboy' bulb also incorporates a filament damper rod that helps protect the filament from breaking due to vibration and bumps. Low beam does typically represent a reduction in visibility though. This bulb balances the two by increasing brightness, but keeping the light low so as not to affect oncoming traffic. Try them, you will not be sorry. Sold as a pair.

Specs: H4 12V 60/80W 3090K

Price: $79.00

IPF Wiring Harness
If you're looking to run bulbs 'hotter' then the factory 55/60w setup, you should plan on upgrading your wiring harness. Without the harness you take a chance on melt-down of your factory complete harness and endless headaches of troubleshooting all systems affected. Keep it safe and simple with this plug in harness from IPF. It draws power straight form the battery and bypasses all factory wiring to power your lights. The relays are triggered by your factory headlight switch for ease of use. Everything plugs right in as well. No splicing or rigging to beef up your headlight system. This is the most simple and reliable kit on the market for any vehicle. IPF’s high performance wiring loom also makes a large difference with low wattage applications where the original vehicle wiring is inadequate.

Price: $85.00