Sidekick/Tracker/X90 Bumpers
We offer a wide variety of bumpers from several different manufacturers. There is something here to suit every need.

Sidekick / Tracker Front Shrockworks Winch Bumpers
Geo Trackers & Suzuki Sidekicks are probably the best value and one of the most capable and underrated 4x4's on the market today. Light weight, compact and Suzuki engineering and reliability. If you like play offroad in the rock & ruts though, it's time for some serious protection. The low hanging plastic factory bumper is easy prey for obstacles on the trail, especially since they tend to sit lower than some vehicles. The ShrockWorks winch bumper is just the ticket to even the odds and allow you to charge ahead with confidence.
You are looking at the best bumper on the market for your Tracker or Sidekick. Like all ShrockWorks products, it is computer designed in 3D CAD, laser cut, CNC bent. You can have a great looking bumper that offers real protection and a winch mounting location too.
Specifications include ability to hold up to a 9000lb winch, 3/16" plate steel construction, 3/8" steel recovery tabs, and weight of 89 pounds.

Options:
-Choose from Standard upper tubes, Pre-runner style upper tubes, center tube only or no upper tubes.
-Choose from a bare steel, black powder coat, or semi-matt dark gray powder coat.
-Choose from 2 versions of mounting brackets: 0"-1" body lift and 2"-3" body lift. Different brackets can be purchased later if needed. They are $95.00 purchased separately, so it would be best to get the correct ones at the initial time of purchase.
Read the expert Review on: ZukiWorld.com

Bumper w/ 0"-1" Body Lift
Price: $525.00

Bumper w/ 2"-3" Body Lift
Price: $555.00

Black or Gray Powder Coat
Price: $150.00

No Top Tubing
Discount: -$40.00

Center Tube Only
Discount: -$20.00

"Double Tough" Sidekick / Tracker Front Tube Winch Bumper
Designed with a close fit to provide maximum approach angles. Made from .145 wall material with an OD of 1.900 to provide maximum rock bash protection & attractive styling. Finished in black powder coating. Choose from 2 door or 4 door applications. Will need modification to work with body lifted vehicles. Made by Trail-Tough.

"Double Tough" Sidekick / Tracker Rear Tube Bumper
Designed with a close fit to provide maximum departure angles. Made from .145 wall material with an OD of 1.900 to provide maximum rock bash protection & attractive styling. Finished in black powder coating. Choose from 2 door or 4 door applications. Will need modification to work with body lifted vehicles. Made by Trail-Tough.

Double Tube Front Bumper
The best front end protection you can get. Heavy duty 3" steel tube welded construction. Features front grill hoop which protects grill and head lights. Light tabs included to mount two off road style lights. Bolts directly to vehicle frame without drilling or welding. Kit comes complete with bumper, mounting hardware, and instructions. Finished in black powder coat for years of durability.

Front Plate Winch Bumper
The ultimate winch bumper for your Sidekick or Tracker. A serious piece of off-road equipment built and design for hardcore trail riding. This design gives maximum approach angle. Fits most Warn winches up to 9000lbs. 3/16" & 1/4" plate throughout construction, not wimpy 10ga. sheet metal used in others. Bumper is fully bolt on. Uses every available point on frame for maximum strength. Outer bumper end beams are fully reinforced and tapered for max clearance in the rocks or trees. Bumper comes ready to install on non body lifted rigs or you can purchase 3" body lift brackets separately. We have been told it is easily modified to run on other body lifts as well

Rear Double Tube Bumper
Heavy duty 3" steel construction that replaces flimsy stock rear bumper. One piece welded unit bolts to stock factory mounting holes and requires no welding or drilling. Major increase in departure angle means improved off-road clearance. Finished in semi-gloss black. Bumper also available in a single tube design to be used in conjunction with stock rear bumper. Single tube bumper comes with a light duty hitch plate for a hitch ball to use as a tow point.

Rear Swing Away Tire Carrier and Accessories
The new rear swing away mounts directly to frame and is completely bolt-on. The bumper features 3/16" plate steel construction throughout. The swing away portion of the bumper rides on self lubricating Delrin bushings and provide easy one hand operation for movement of the carrier. Requires some minor welding to obtain maximum strength. Re-enforced ends for rock dragging. Carries a full size spare up to 33" x 12.5". Fits convertible and hardtop models ‘89-‘98 2 door 3" body-lifted models only. Shown with optional spin on tire release handle.

ARB Front Winch Bull Bar
ARB is world renowned for their Bull Bar front bumper systems. The design for the Sidekick Bull Bar is no exception. Safety, protection and function. Mounting to factory front bumper mounts and for extra rigidity, directly to the front of the frame. A great part of the bar is the driving light mounting tabs and tow points. Like everything else ARB does, the powder coating process is top notch. Each bumper is prepared first by shot blasting, priming with a zinc chromate, then sprayed with a strong black powder coat and oven cured providing a long, lasting maintenance-free finish. The ARB Bull Bar is also winch ready and made to use with Warn M6000 but may be easily modified to run many other Warn or T-Max winches.

Drawtite Class 1 Tow Hitch
Bolts on quickly and easily to the frame and allows your Sidekick, Tracker or X90 to tow up to 2,000 lbs. gross towing weight. Economical class 1 receiver style hitch made from 11⁄4" square receiver tube. Comes complete with receiver pin and clip. Solid all-welded construction for maximum strength and safety and finished off with high quality black powder coat finish. Backed by a Nationwide Manufacturers Limited Lifetime Warranty.

ZOR Sidekick / Tracker Rear Dominator Bumpers
The new ZOR "Dominator Rear Bumpers" for 1st Generation (1989 to 1995/ some 96 frames) Suzuki Sidekicks & Geo Trackers. The shells are made with 3/16” cold rolled steel folded on a 100 ton press. Turret punched for close tolerances. They were designed to hug the body and provide optimum protection while increasing off road clearance. They use four large metric HD bolts to the existing frame and three smaller bolts for interior frame support. Bumper weighs about 58 pounds. (cart will show more for accurate shipping costs)

ZOR Dominator OPTIONAL Receiver
The receiver can be added anytime to either 2 or 4 door rear Dominator bumpers. Constructed with HD angle iron and seamless Receiver tube. Weights about 20 pounds. (cart will show more for accurate shipping costs)

ZOR Tire Carrier for the Dominator Rear Bumpers
This heavy duty tire carrier is a bolt on unit that can be added anytime to either 2 or 4 door rear Dominator bumpers. Constructed with Tapered Roller bearings, .120” wall square tube, the tire plate can be set up for both the Suzuki and the Toyota bolt pattern. Comes with the ZOR Hi-Lift type jack mount. Gas can bracket (you will need to provide tray and can) and all Grade 8 hardware. Drilling of the bumper is required for the installation. Great product for DIY rear bumpers.

Mounts with 7/8th grade 8 bolt, tapered bearings and pivot box bolts onto the right wing section of the Dominator rear bumper with four HD bolts. The locking mechanism is our tried and true "Trail Proven" T- handle with bolt on rest plate. Weighs about 38 pounds. (cart will show more for accurate shipping costs) Choose from Carrier with Suzuki lug pattern (5x5.5) or Toyota lug pattern (6x5.5).

Cart will show more than actual weight for accurate shipping costs

ZOR Sidekick / Tracker Front Dominator Bumpers
The 2 door and 4 door front winch bumpers for all year First Gen (1989 to early 1996) Suzuki Sidekicks and Geo Trackers. They are made with 1/4” cold rolled steel winch center sections with 3/16” cold rolled steel bumper ends with special reinforced wings folded on a 100 ton press. HD frame mounts and bumper to frame brackets. Turret punched for close tolerances. The Dominator is designed to allow for 1/2” height adjustments from stock to 3” body lifts.

All brackets and hardware are included in the price. Center sections have 2 industry standard winch bolt patterns for use with all winches. Industry standard fairlead holes. No winch or fairlead is provided with purchase. These can be mounted to the 2nd/3rd Gen models including the Vitara and Sport but will need modification to do so.

We do recommend that you weld on (after bolting in position) the frame brackets. They are shipped in a raw steel condition only. Options include stingers similar to the single (VIEW) and double (VIEW) bend styles that we have for the front Samurai Subspeed bumpers. You can also add on a 2 D-rings that will be welded to the front of the bumper on each side of the fairlead opening and a class 3 receiver. Bumper weighs about 58 pounds. (cart will show more for accurate shipping costs)