Sidekick/Tracker/X90 Brakes
Everything you need to get your rig stopped on a dime.

Electric Brake Line Lock Kit
These line locks have unsurpassed holding power which guarantees to keep you from rolling at any angle. Check out the features and you will see what sets it apart from the rest. Including the price on the best selling Line lock on the market!
•Completely rebuildable solenoid
•Designed to operate under extreme heat for optimum durability
•Built in mounting tabs
•Hi-flow inlet / outlet ports
•Withstands 3,000 psi line pressure
•Each unit is individually tested and backed by a 1 year warranty.
•Comes with accessory kit that includes fuse, indicator light, and high quality switch

Price: $55.98

Note: This part is intended for off road use only. A full charge on your battery at all times is a must. If battery drops bellow about 9 Volts the brakes may disengage and can lead to possible injury or death.

Jamar Push Button Line Lock
This hydraulic lock uses the line pressure of the system to hold your brake locked, no electrical or special linkage required. Just step on the foot brake, push the park lock down, let off the foot brake and its locked. Step on the foot brake again and it opens automatically. Holds any vehicle with hydraulic brakes where you put it. Also with the park lock set it removes all pounding on ring and pinon gears when tailoring a vehicle. Made for use with silicones and DOT 3 fluids.

Price: $32.95

Trail Tough Disk Brake Kit
This basic kit includes the pieces necessary for the do-it-yourselfer to put stock Samurai front calipers and rotors on the rear of your Sidekick or Tracker. All you need is a set of front Samurai rotors, calipers and the caliper mounting bracket from the Samurai that the caliper bolts to and holds the brake pads.

NOTE: You must also install a proportioning valve (like the ones bellow) and set it properly. The stock proportioning valve is not sufficient for this conversion.

Price: $99.00

Spidertrax Proportioning Valve Kit
Running a rear disc brake conversion requires a proportioning valve setup. This kit, designed for the Suzuki Samurai, is bolt-on requiring NO cutting or flaring of existing brake lines and includes the dial type proportioning valve. Also included are detailed calibration instructions. Choose from the dual brake line kit for 85-88.5 Samurai’s or the single brake line kit for the 88.5-95 Samurai’s. The SSB Dial Type Proportioning Valve is also available separately.

Kit
Price: $71.20

Valve
Price: $47.45