When you are hitting the brakes on your Toyota Tacoma, Hilux, 4Runner or Sequoia and there almost seems like someone is hitting you in the rear it most likely is the cause of the drive line or drive shaft splines not lubricated.

This is the best lubricant on the market for driveshaft slip yokes. It has a PTFE base, usually known as Teflon, most of which you see in heim joints or rod ends for great wear-ability. PTFE is also used in high friction applications because it does not easily get washed off when hit with water. 

Learn More

An extremely simple and affordable alternative to much higher priced systems, these new 5100 Height Adjustable shocks feature multiple snap-ring grooves on the body of the shock to accommodate different spring seat positions, allowing height adjustments from 0" to 2.5" By raising the spring seat position, you can alter the factory rake to achieve a level front to rear ride height. The shocks feature vehicle specific split digressive valving and Bilstein’s industry leading high gas pressure monotube technology. Learn More

Low Range Off Road has designed a Differential Drop to keep those Constant Velocity Joint boots from tearing, and keeping those CV Joints from premature wear from the increased angle. We also have 12MM Head extended bolts instead of off the shelf 13MM Bolts that get lost when you do an oil change. Learn More

Bilstein 5100 Series Shock Absorbers are high gas pressure monotube shocks designed specifically for the Toyota Tundra for 0-1" Lifted Applications. Learn More

Our Blocks are CNC Cut and Machined from solid 6061-T6 Billet Aluminum, with a CNC Machined Pressed in steel locating stud. By our machining and press technique, we achieve what cannot be matched in todays market- ACCURACY.

This 1 degree taper is machined in the block with a CNC Machined "F" indicating which way the block is installed in the vehicle. Why a taper? We have found that with a 1 degree taper we achieve the least drive train vibration.

Learn More

Need a little lift in the rear? How about the best new u bolts and blocks for your Tacoma and Tundra?

Our Blocks are CNC Cut and Machined from solid 6061-T6 Billet Aluminum, with a CNC Machined Pressed in steel locating stud.

Keep the same quality as your factory components and replace the ubolts with the correct specs! Click on the product picture to see why.

Learn More

Similar to what Toyota put on the Tundra TRD Model from the factory, these 4600 Series are a great shock that are likely going to last the rest of the liftime of the truck.

Learn More

These steel reservoir mounts are great for securing a shock reservoir, fuel pump, fuel filter, or almost anything else that has an O.D. of 2” or 2-1/2”. They can be welded on to almost any size of round tubing.

 

Learn More