Toyota Front and Rear Super Flex Leaf Springs

Our lift springs are flexible on the trail yet hold their lift year after year. Springs are pre cycled and load tested to maintain quality. Nylon pads between the leafs reduce noise and allow springs to flex more easily. Raised clamp assemblies prevent binding of the leafs within the pack. Dual-pass shot-peened to relive material stress.

Front Springs feature a full military wrap on the front and the 1/4 wrap on the rear. Spring rate is 220 lbs per inch. Leaf pack is 6 leaves. Springs are 47" long as measured along the top leaf. Pin to center of front mount is 22" and pin to center of the shackle mount is 25". New poly bushings and left side spring pad are included with springs.

NEW! Now a front 5" spring is available in a heavy duty version with a 25% higher spring rate. A 7th leaf is added and the length of the leaves is readjusted to match. The HD leaf springs are great for heavier trucks and 4Runners with full bodies and exo-cages, V6 Toyota and Tacoma applications, and also works great for V6 and V8 engine swaps. The length is the same as our super flex spring, but with a higher spring rate the spring will hold its arch and lift longer.

Rear Springs feature a full military wrap on the front and the 1/4 wrap on the rear. Spring rate is 235 lbs per inch. Leaf pack is 7 leaves plus a special torque leaf to reduce axle wrap. Springs are 56 5/8" long as measured along the top leaf. Pin to center of front mount is 27 1/2", pin to center of rear mount is 29 5/8". New poly bushings are included with springs.

These springs are longer than stock and will require hanger relocation.