Need to mount up shocks but don't like the typical "tube style" shock hoops?  These shock towers are an alternative to the other shock towers available today with a few added benefits. We designed these for the Samurai, and our instructions are made for them but they will work on other models as well with modifications.

Learn More

These steel reservoir mounts are great for securing a shock reservoir, fuel pump, fuel filter, or almost anything else that has an O.D. of 2” or 2-1/2”. They can be welded on to almost any size of round tubing.

 

Learn More

The OME D6XL is an add a leaf for '89-1995 Toyota Pickups and '95.5-2004 Toyota Tacoma's. This adds 200 Lbs Extra Load Carrying Capacity in the rear.

Learn More

For those who have bolts and bushings, this is a weld on spring hanger only. Shipped bare without any accessories. This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator SAS Solid Axle Swaps and Classic Lift kits. Learn More

This is a stem Adapter for Bilstein 5150 Shocks.

 

MFG Part Number 192228 and B4-B0A-0000228

Learn More

These shock mounts are designed to weld directly on to the Rock Assault Front Axle Housing. Sold as a pair. Learn More

Trail-Gear O.D. Tube Clamps are ideal for suspension and steering brackets that you need attached to a section of tubing when you don’t want to weld the bracket directly to the tubing because adjustment or frequent removal of the bracket is needed. Learn More

Get two bumpstops and two extensions for one great low price! Learn More

Low Range Off Road is all about providing you parts that you can use universally. These are shock hoops that are not assembled, so you can install them anywhere. You can use your creativity in mounting, cutting, and assembling. Front or rear! Learn More

Our lift springs are flexible on the trail yet hold their lift year after year. Springs are pre cycled and load tested to maintain quality. Nylon pads between the leafs reduce noise and allow springs to flex more easily. Raised clamp assemblies prevent binding of the leafs within the pack. Dual-pass shot-peened to relive material stress. Learn More

These easy to install extended upper shock towers will allow your Samurai to run longer front shocks. These towers are one of the most popular style upper front mounts used in the Samurai world. Welding required. We also suggest plating the frame for reinforcement prior to installing the towers.

Learn More

Are your leaf spring slip pads worn from repeated usage of leafs?  Building your own leaf pack and want to keep things from squeaking?  Use these high quality leaf spring slip pads (or sometimes called spring isolators) and keep your vehicle from sounding like a army tank going down the trail.  Priced individually. Learn More

Long travel shocks are an important part of a flexible off road suspension system. Bilstein shocks are world renown for quality and performance. Learn More

We carry two different Series Shocks, the 3000 Series DT shocks and the 8000 Series. We generally use the 3000 series DT shocks on our Suzuki's and Toyota's because of the lower valving. This makes for a better ride due to the light weight characteristics of the Smaller vehicles.

Learn More

We carry two different Series Shocks, the 3000 Series DT shocks and the 8000 Series. We generally use the 3000 series DT shocks on our Suzuki's and Toyota's because of the lower valving. This makes for a better ride due to the light weight characteristics of the Smaller vehicles.

Learn More

Protect those shiny new Shock piston rods! These shock boots extend the life of your shocks by keeping the piston rods free from dirt and dust. We carry Red and Black boots. Sold in Pairs.

Learn More

These shock mounts are designed to weld directly on to the axle housing. Can be used for front or rear axle applications. Made from 3/16" plate steel. Mounts have curved bottoms that can be mounted horizontally or vertically on axle. Mount is 2.5" tall with 1/2" shock mount holes. Learn More

A rear shock hoop designed to allow shocks to be moved on top of the axle and tilted inward to allow maximum travel. These are designed to use eye mount shocks and are a weld-in item. Constructed of .120” wall 1.5” tubing. Fits all ‘79-‘95 Toyota pickups and 4-Runners. Includes lower shock mounting tabs. note:trim to fit.

Note: may need to trim to fit.

Learn More

These heavy duty rod ends are ideal for today's flexible suspension systems. Super strong, Creeper Joints will hold up to years of punishment. The outer shell is a single forged piece. The inner flex ball is made from 8620 tool steel and rides on high quality polyurethane bushings. Heavy-duty, hardened steel washers hold the joint together. Creeper Joints are super Learn More