Toyota Truck G52,G54,G85 & W56, 4 cyl Transmission to GM V8 Adapter Bell Housing Kits and Parts

712560 kit is designed for the GM blocks with a 153T flywheel. 

712560V kit is designed for the GM blocks with a 168t flywheel or a newer Gen 3 engine.

This adapter bellhousing assembly is used to adapt the GM 4.3, V8 to the 1984-95 Toyota Truck 5 speed manual. These transmissions are identified as G52, G54, W56, & G58. They were used in the 4 cyl, non-turbo trucks only.

Note: When using a 168^th flywheel use kit P/N 712560V. Note: When using a 168^th flywheel on your GM engine a gear reduction starter is required. We offer gear reduction starts (p/n 22-0001 & 22-0003).

Note: GM 4.3 V6 conversion applications with a 168^th flywheel will experience header interference with the slave cylinder & throw-out arm. At that time, it is recommended that a muffler shop custom make an exhaust down pipe.

Required Clutch Options:

P/N 716213 Slave Cylinder

P/N 716105 10.5” Clutch Disc

P/N N1430 Throw-Out Bearing

P/N CF360056 10.5” Pressure Plate

Starter Part Number 22-0001 is a 200 lb.ft Torque Starter By Powermaster.