Low Range HD 2 Inch Body Lift Kit (Sidekick, GV, Vitara, Tracker, X90)

This is a 2" body lift kit for the Sidekick, Tracker, X90, Vitara, and GV.

What makes our kit different than the rest is:

-We run a full 3" O.D. Solid UHMW spacers. Other kits run a 2" O.D. Going with a 3" Material covers more surface area, giving the body more support. The factory surface area is 3", so we like to keep the body supported as tightly as possible so that it doesn't move on the frame. The spacers are drilled to the size of the stud adapter so that there is no excess play inbetween the stud adapter and the spacer itself. This ensures that once the body is securely fastened, the body is fully supported.

-Our washers are custom lazer cut pieces, made out of 1/8" steel plate. We found that other kits and stock washers did not have a tight inner diameter. This caused much play between the machined stud adapter and the washer itself... not something you want.

-Our washers and machined stud adapters are plated for corrosion resistance. Other kits do not have any plating and are just bare steel.

Installs in approximately 2 hours. Perfect for fine tuning the fit of larger tires to your vehicle or for clearing the hood with larger engine swaps. These kits are a must if you want an economical way to maximize the lift on your Rig.

• Includes:
• -Heavy Duty UHMW spacers
• -Longer metric bolts
• -Custom-built stud connectors (gold zinc plated for corrosion resistance)
• -Instructions

Kits do not include anything to raise the bumper covers but on most vehicles it is pretty easy to make work.

For 99+ models, you will require a steering rod extension. (Coming Soon) We currently do not have these but they are very easy to make with a couple pieces of tube and longer hardware.