PENTADAPTER 5 Pattern Suzuki to Toyota Drive Line Adapters

5 Toyota Patterns and 1 Suzuki Pattern for adaptability for your Suzuki Samurai, Jimny or Sierra to all Toyota Drivelines known to man.. except the 2007+ Toyota Tundra.

Specs:

• - 4140 Chromoly Construction- Precision CNC Machined from 4140 Chromoly Steel.
• - Special Bicolor Zinc Plated for Corrosion Resistance.
• - ALL METRIC Hardware.  Previous adapters had a 3/8" bolt.  A Toyota driveline is a 10mm bolt. a 3/8" bolt diameter measures 9.35mm, a 10mm bolt measures 9.80mm.  When you put a 3/8" bolt into a Toyota transfer case or pinion flange there is almost a full millimeter of play. We have these machined for the 10MM bolt. This makes the bolt stronger, and less play within the bolt holes.
• - The heads of the bolts are 14mm ... the same head size as your Toyota driveline hardware. This makes it so that driveline changes can be done with ease and without socket or wrench differences.
• - Included Drill bit for drilling the Samurai flange. It is sized perfectly for a tight fit of your Samurai bolt pattern to adapter.

It is a well known fact that Samurai drive lines weren’t the strongest ever built. Fortunately there is a great low cost alternative to custom made drive shafts. These spacers allow you to replace the stock pretzel you just bent with a much stronger Toyota drive line. They are also a good thing to have when you are doing the common Toyota axle swap.