ZOR Sidekick/Tracker Rear Dominator Bumpers

The new ZOR "Dominator Rear Bumpers" for 1st Generation (1989 to 1995  and some 96 frames) Suzuki Sidekicks & Geo Trackers. The shells are made with 3/16” cold rolled steel folded on a 100 ton press. Turret punched for close tolerances. They were designed to hug the body and provide optimum protection while increasing off road clearance. They use four large metric HD bolts to the existing frame and three smaller bolts for interior frame support. Bumper weighs about 58 pounds.

The optional heavy duty tire carrier is a bolt on unit that can be added anytime to either 2 or 4 door rear Dominator bumpers. Constructed with Tapered Roller bearings, .120” wall square tube, the tire plate can be set up for both the Suzuki and the Toyota bolt pattern. Comes with the ZOR Hi-Lift type jack mount. Gas can bracket (you will need to provide tray and can) and all Grade 8 hardware. Drilling of the bumper is required for the installation. Great product for DIY rear bumpers. Mounts with 7/8th grade 8 bolt, tapered bearings and pivot box bolts onto the right wing section of the Dominator rear bumper with four HD bolts. The locking mechanism is our tried and true "Trail Proven" T- handle with bolt on rest plate. Weighs about 38 pounds. Choose from Carrier with Suzuki lug pattern (5x5.5) or Toyota lug pattern (6x5.5).

The optional receiver can be added anytime to either 2 or 4 door rear Dominator bumpers. Constructed with HD angle iron and seamless Receiver tube. Weights about 20 pounds.