Sky OTS Cross Over / Histeer Kits

Are you running a spring-over-axle and hate your steering? Drop pitman arms are not enough, and z-links can still allow bump-steer and is constant hassle.

In this crossover or “high-steer” kit, Sky uses massive Toyota FJ-80 Land Cruiser tie rod ends for the mounting points to the steering arms, almost 50% larger than weaker Suzuki ends. Weak tie rod end joints is the most common failure of many of the major “OTT” steering kits out there. They use smaller tie rod ends not built to take the pressure of off-roading and larger tires. Toyota FJ-80 joints also offer more deflection than that of other tie rod ends, so this gives you peace of mind when using them on a super flexy suspensions. Using Toyota ends also gives us the advantage of adjustable steering linkage, unlike other standard Right Hand thread only kits on the market.

Both kits can be installed in under an hour with no modifications needed, fully bolt-on and adjustable. The new steering arms are machined from solid billet steel and bolt right into exicting mounts on your knuckle where the brake calipers bolt to. This is the strongest and safest place to mount to. Made to work with spring over axle kits, 4.5” of lift on up to and above 8” with your stock Samurai or Sidekick Pitman arm and more lift with a drop pitman arm.

Note: We now have Right Hand Drive kits for those in Countries that have the steering wheel on the other side of their rigs.