Samurai ZOR Front Winch Ready Rock Crawler Front Bumpers - 4 Styles

Each of these bumpers start with the prefab center section. It has seen many design changes over the last few years including a winch plate and fairlead bracket. This center section was designed to hug the front of the Samurai allowing the most possible clearance when ledge crawling. Built for winches pulling up to 9,000 lbs (some winch brands up to 9,500 lbs).

If your winch is smaller, you can re-drill and center the winch very easily. There are two sets of slotted holes. They are predrilled off-center using the industry standard mounting pattern and centered to the same pattern allowing complete versatility in your winch installation. The fairlead slot and holes are centered to the vehicle.

You can order just the center section and build from there or choose from 3 different bumper end styles: "Solid Face" Ends (no turn signals), Oval Turn Signal Ends, or Stock Turn Signal Ends. Other options listed in pricing.

You can also purchase separately the matching Fender Guards to protect your fenders and headlights.

We also highly suggest the HD bumper mount kit if you plan on using your winch on a regular basis. It is a great insurance policy to avoid frame ripouts.

Bumpers do not come with lights. We do sell them separately though.

PLEASE NOTE: These Bumpers are built to order and are on at least an 8-10 week turn around time. If you do have time constraints please contact us for current time frames.  Once ordered they cannot be canceled.