Add one of ShrockWorks popular front winch and non-winch bumpers to your Samurai for great looks and the ultimate strength. These bumpers are designed to take maximum off-road abuse. The lower portion of the bumper is all 1/4" and 3/16" steel which makes the bumper incredibly strong!.

ARB is world renowned for their Bull Bar front bumper systems. The design for the Samurai Bull Bar is no exception. Safety, protection and function. Mounting to factory front bumper mounts and for extra rigidity, directly to the front of the frame. A great part of the bar is the driving light mounting tabs and tow points. Like everything else

Trail Tough's bumper series are Tough! Designed with a close fit to provide maximum approach and departure angles. They are made from .145 wall thickness material with an OD of 1.900 with tight radiuses to provide maximum rock rash protection and attractive styling. Finished in black powder coating. Uses factory lighting. Fully bolt on and can be used with most shackle reverse kits and Missing Link set ups.

This bumper offers super protection for the front end of your Samurai. The bumper features 3" steel tubing and 1 piece welded construction which makes this bumper extremely tough and durable. The bumper also has an added grill hoop bar for extra protection and two light tabs for mounting off road lights as well. The factory front turn indicator lights

Finally, a rugged, easy way to mount your winch on the front of your Samurai. Uses our exclusive mounting system found on all of our heavy duty winch bumpers. Has all the same features of our regular tube bumper except it is designed to accommodate your winch. The bumper can accommodate winches up to 22 inches wide. Recommended maximum winch

This heavy duty bumper is built from 1/4" steel plate throughout. The winch plate is pre-drilled to accept all Warn or Ramsey winches up to 9000 pounds. Unlike other designs out there, you are not limited to the style of winch that can be used. Stand-up or standard flat style will install with ease and full access to the winch.

These Heavy Duty winch bumper features 1/4" & 3/16" plate throughout. The bumper has pre-drilled winch mounting plates and accepts all Warn or Ramsey winches up to 9000lbs. Strongest bumper and mounting system on the market today. Allows additional front tire clearance by removing outer stock bumper mounts.

Each of these bumpers start with the prefab center section. It has seen many design changes over the last few years including a winch plate and fairlead bracket. This center section was designed to hug the front of the Samurai Learn More

Another great product from ZOR if your not running a winch.

This is another simple bolt on product that will turn heads and give your zuk some muscle against trees and rocks. Fully welded and made with the same procedures and materials as the winch bumpers. If ordered with the class 3 receiver, it is supported by additional thick wall square tubing welded between the uprights. No drilling required to mount.

This bumper looks like the Front Winch Ready Rock Crawler Bumpers but is a lower profile without the normal uprights. You can order just the center section and build from there or choose from 3 different bumper end styles: "Solid Face" Ends (no turn signals), Oval Turn Signal Ends, or Stock Turn Signal Ends.