ZOR My-Side 1 and My-Side 2 Harley Davidson Side Draft Carb Installation Kits for Samurai

The newest way to give your power-plant some extra ponies and better off road running capability!

The My-Side side draft system for the Suzuki 1.3 & 1.6 8V engines bolt right on in two different configurations. Both uniquely feature a water heated billet block for quicker warm up times and a 3" adapter ring that can be attached to a DIY snorkel.

The My-Side kits includes everything except the side draft carb parts. Used carbs are readily available in the $50 to $70 range on eBay or your local biker shops. You use the Harley D 40mm or 44mm CV carb with the OEM choke cable and rubber intake boot. Manufactured from 1996 to 2006 with this kit. The instructions include simple and straightforward "how to" steps to modify the carbs for this application. Modification takes less than 40 minutes.

The My-Side 1 kit includes the aluminum water heated billet block, the 48"; enrichment cable (choke), an accelerator cable stop, bracket, adapters, elbow, filter, hoses and all hardware. Now also includes the Holley 12-804 pressure regulator. For the CV conversion your new or used carb needs to have the rubber intake boot. If the one you get does not have one we sell them as well. For either a 40 mm or 44mm new or used carb the complete choke assembly is a must as well. If the one you get does not have one, we sell them also. All 6 brand new HD parts modified into a 4' ez to install choke assembly. Another simple and easy product to install. Rapid acceleration and quick throttle response. Improve mpg's and doesn't stall at angles. This bolt on system does not require removal or your 1.3 style intake manifold. The pictures show the finished product and parts used in the installation.

The My-Side2 comes with a powder-coated specially side milled intake and a water heated billet block. This system can be adapted to a snorkel just like the regular MY-SIDE. The MY-SIDE2 kit comes with everything needed except the side draft carb including the powder-coated aluminum water heated billet block, powder-coated 1.3 Suzuki intake manifold, the 48" enrichment cable (choke), an accelerator cable stop, bracket, adapters, elbow, filter, hoses and all hardware. Now also includes the Holley 12-804 pressure regulator. Another simple and easy product to install. This set up makes the 1.3 & 1.6 come alive. Rapid acceleration and quicker throttle response. Improve mpg's and doesn't stall at angles. This bolt on system does not require a core charge for the altered intake manifold. We will offer a powder-coated thermostat housing to match for a limited time for only $14.95 The picture shows the finished product and parts used in the installation.

Both kits are sold as OFF-ROAD ONLY. No claims are being made that the My Side or My-Side2 will pass emissions in any jurisdiction requiring emissions certification.

Refundable $50.00 Core charge on 1.3L intake if ordering the Myside 2 kit. For more info on Core see our Policies page.

PLEASE NOTE: THE MYSIDE 2 KITS ARE BUILT TO ORDER AND ARE CURRENTLY AT LEAST 12 WEEKS OUT ONCE ORDERED. ONCE ORDERED THEY CANNOT BE CANCELLED.  MYSIDE 1 ARE ABOUT 4-6 WEEK TURN AROUND.