Warn M12000 Winch - 17801

A RELIABLE WORKHORSE TO MEET HEAVY WINCHING NEEDS For heavy-duty winching needs, this winch is a champion workhorse. Big torque, power and quick no-load retrieval speed is 30 feet per minute. Its design is low profile, so it'll fit where you want. And it's powered by the 4.6-hp Series Wound motor and our proven three-stage planetary gear train. With 125 ft. of 3/8" wire rope, the M12000 can solve most any pulling problem.

Rated Line Pull: 12,000 lbs. (5440 kgs) single-line

Intended Use/Application: Vehicle Recovery / For Heavier Trucks and SUVs

Motor: 12v 4.6hp - 24v 2.5hp Series Wound

Duty Cycle Rating:

Remote Control: Remote, 12' (3.7m) lead

Geartrain: 3-Stage Planetary

Gear Ratio: 261:1

Lubrication: Aeroshell # 17

Clutch (freespooling): Rotating Ring Gear

Brake: Automatic Direct Drive Cone

Drum Diameter/Length: 3.5"/8.2" (9cm/21cm)

Weight: 136lbs. (62kgs.)

Wire Rope: 125', 3/8"diameter (38m, 9.5mm diam)

Fairlead: Roller

Recommended Battery: 650 CCA minimum for winching

Battery Leads: 2 gauge, 72" (1.83m)

Finish: Argent Gray Powder Coat

CE Winches: CE products are designed to meet European Standards. CE winches include CE labels, manuals, roller fairlead, safety hook and thimble.

• 12V DC PERFORMANCE SPECS
• Line Pull
• Lbs.(Kgs.) Line Speed
• FT./min(M/min.) Motor
• Current Pull by layer
• layer/Lbs(Kgs.)
• 0 30(9.14) 67 amps 1/1200(5443)
• 2000(910) 14(4.27) 140 amps 2/11120(5044)
• 4000(1810) 8.62(2.63) 210 amps 3/10340(4690)
• 6000(2720) 6.92(2.11) 250 amps 4/9770(4432)
• 8000(3630) 5.80(1.77) 320 amps 5/9250(4196)
• 10000(4540) 4.39(1.34) 370 amps
• 12000(5440) 3.86(1.18) 440 amps