Trail-Gear knows that when it is time for a recovery that the last thing you need is a broken winch line, so we made our Rock Recovery™ Winch Line from 100% pure Dyneema Fiber (SK-75), which is the strongest and most UV resistant material in the world for synthetic winch lines. Our Rock Recovery™ Winch Lines come with a stainless steel thimble and are all pre-stretched, 12-strand braids. They also come with the first 5 feet covered with a black nylon sleeve to protect the line from rocks and trees. Learn More

We all know that recovery is just a natural part of four wheeling and rock crawling, and we also know how it feels to not have the right recovery equipment when you need it. That is why Trail-Gear has looked long and hard to find just the right recovery straps for rock crawling and extreme four wheeling. Learn More

Polished aluminum hawse fairlead. Designed for use with synthetic winch rope. Mounting holes are 10" on center for standard 3/8" bolts, compatible with most 5,000-9,500lb winches. Ultra smooth guide surface (rounded on both sides) to prevent damage to rope. Learn More

Trail Gear’s Hi-Lift Jack Mount is laser cut from 3/16” thick steel and then CNC formed. The ends of the mount are coped so that they can be welded to 1 3/4" tubing. We use a 1/2" thick bolt that has a precision hole drilled into it so that a hair-pin/cotter style pin can be inserted. This will keep the nut from rattling off and ensure that you never lose your hi-lift jack on the trail. We also added rubber pads that go between the jack and the mounts and a Velcro strap to hold the handle in place so that no vibration will be heard from any of the mounting locations. A second hole was placed on the mount so that you can put a padlock on the hi-lift to keep it totally secure from loss or theft. Product is shipped unpainted, must be welded on. Learn More

Ideal for creating tie down points on trailers. Welds in place. Super tough, heavy-duty forged design. • 5/8" Ring Diameter • Capacity: 18,000 lbs. • Working Load Limit: 6,000 lbs • 4 3/8" overall width Learn More

Trail-Gear’s Weld-On Attachment Points are machined from Billet 1020 cold rolled steel. They come in two different fitments, one is coped on the bottom so that it can be welded on to a 3" axle tube, and the other has a flat bottom that can be welded to plate, tubing, or any other flat surface. These make great attachment points for any rig or buggy, and work well with our 3/4" Shackle D-Ring. Sold individually. Learn More

Designed to fit into standard 2" hitch receivers. Makes a great anchor point for winch or strap recoveries. Made from 8620 forged tool steel. Working load limit 4 3/4" tons. Includes 3/4" D-ring and receiver mount. Zinc plated finish. Does not include standard 5/8" hitch pin for receiver. Learn More

D-Ring shackles make a great pull point for vehicle recovery. Working load limit 4 3/4" tons. Learn More

This hi-lift jack rubber isolator is is the perfect fix for that hi-lift style jack you have rattling around in the back or your truck. The isolator slides onto both the jack and the jack handle keeping them from vibrating together and holding both components firmly in place.

Learn More

Trail-Gear understands when you have a link or even leaf sprung suspension, that during a vertical climb or decent, your suspension will unload making your truck less stable as the center of gravity becomes higher. Their answer to this problem is a small, easy to mount suspension winch that will allow you to stabilize your suspension and effectively control how much suspension droop you have during times when having that control makes all the difference. Learn More

We all know that synthetic winch line is much safer and easier to use than traditional metal winch line. The issue is that synthetic winch line can be damaged more easily than metal winch line if it is not used properly, or if it is not sufficiently protected from jagged rocks or other sharp and abrasive surfaces. Most winch lines come with a nylon sleeve that can be slid over the rope to protect it from harmful elements that would cut or damage the expensive winch line, but the nylon sleeve itself can become worn, torn, or damaged over time, leaving your winch line exposed. Learn More

Synthetic winch line is expensive to replace so it is important to protect your line and make it last as long as possible. That is why Trail-Gear developed a stainless steel tube thimble that will protect your line and keep it from twisting and fraying at the ends. This tube thimble is easy to install. Simply cut your line down a few inches until you have a new clean piece of line, push the line through the thimble and then braid the line so that the thimble is in place. Thimbles are offered for both 5/16" and 3/8" winch line. Learn More

The TG8000 is one of the toughest, most reliable winches in the world. With an industry first IP68 rating (Ingress Protection Rating), the TG8000 also meets all SAE-J706 standards for rating winches. With 17 internal seals, it is completely protected from the elements and is 100% water proof and dust/sand proof. Learn More

Trail-Gear’s Winch Puck will prevent your hook and thimble from getting over-spooled and wedged in your fairlead. Over-spooling can damage your winch and wedging your hook can render it useless when you need it to get out of those sticky situations on the trail. Learn More