- Home
- Builder Parts
- Steering
Steering
-
2" Bore Hydraulic (Hydro) Rams and Parts
Starting at: $1.13
Same as above but with larger 2" piston and .800 shaft. 2" Bore rams should only be used when a high volume power steering pump is used such as the Rock Assault TC Pump setup. 2" Bore rams are used when even more steering power is needed, but doesn't react as fast as the 1.5" Bore rams. With the 2" Bore ram, the heim you use jumps up to a 3/4" heim vs. a 5/8" heim used in the 1.5" Bore rams. 6" Application for Toyota knuckles. 8" application for Dana knuckles. Learn More -
Royal Purple Synthetic PS Fluid 12oz. (01326)
$5.25Max EZ is an advanced power steering fluid designed to maximize the life and performance of all power steering units. It is formulated with a blend of select synthetic base oils plus Royal Purple's proprietary Synerlec additive technology, which is proven to make equipment run cooler, smoother, longer, quieter and more efficiently. It is also compatible and can be mixed with conventional power steering fluids and has excellent seal compatibility.
Try Royal Purple today and Feel the Difference!
Learn More
Part #: 01326 -
Economy Power Steering Cooler
Regular Price: $43.00
Special Price: $33.99
Getting a little warm but not doing a hydro assist or a full hydro? The economy cooler may be the way to go. Measures 5” x 7.75” x 3/4”. Includes thru core mount hardware and hose.
Learn More -
Power Steering Fluid Cooler (130516-1)
$71.10If your running a high volume/pressure pump your system is generating much more heat then the stock system. Fluid overheating can cause damage to steering pump and steering box. Installing a oil cooler in front of the radiator is the best way to prevent this over heating.
Learn More -
TC Power Steering Hose Kit (130504-1-KIT)
$80.10This kit contains one high pressure and three low pressure power steering lines. These lines are used to connect the pump, steering box and cooler together. The two hoses that go from the steering ram to the steering box are not included. Learn More -
Rock Assault Steering Stops (140273-1-KIT)
$26.10A good set of steering stops is critical so that your steering does not over travel and damage other steering or axle components. Learn More -
Ram Assist Rock Assault Housing ONLY Front Axle Housing Bracket
Starting at: $16.20
This bracket will allow you to use your current Rock Assault™ Ram Assist Kit with our Rock Assault™ Front Axle Housing. This bracket is needed because the Rock Assault™ Front Axle Housing is shaped differently than the OEM Toyota axle housing. Learn More -
-
All In One Accessory Clamp
$18.75These billet aluminum clamps are great for mounting and adjusting hood pins Learn More -
Vertical Power Steering Reservoir Tank
$37.50Vertical mounted power steering reservoir tanks available in 1.5 lb. standard weight or 0.7 lb. lightweight. Learn More -
Low Range Off Road TC Style Power Steering Pump V-Belt Pulley
$44.95Low Range Off Road is your source for a V Belt Pulley for the popular TC Steering Pumps used in Toyota, Suzuki and Jeep vehicles. We are proud to offer this bling pulley for V Belt operation- most commonly used on Toyota power steering setups. So, if you have a Suzuki running Toyota Power Steering or if you are running a Toyota Running V-Belt Steering this will work for you.
Learn More -
Steel Ram Clamp w/Weldable Mount, Trail-Gear (300791-KIT)
$26.10These mounts are designed to mount your TG Rock Assault™ Double Ended Ram to almost any location on your rig. The clamp has a 2.5” ID and the weld on mount is made out of 1020 billet steel. This Weld-On Ram Mount is supplied with 1/2” zinc-plated hardware. Clamp is made in black zinc-plated 1020 steel. Each kit includes a clamp, mount, and mounting hardware.
Learn More -
Polished Aluminum Ram Clamp w/Weldable Mount, Trail-Gear (300792-KIT)
$26.10These mounts are designed to mount your TG Rock Assault™ Double Ended Ram to almost any location on your rig. The clamps have a 2.5” ID and the Weld-On Mount is made out of 1020 billet steel. These Weld-On Ram Mounts are supplied with 1/2” zinc-plated hardware. Clamp is made of polished 6082-T6 forged aluminum. Each kit includes a clamp, mount, and mounting hardware. Learn More -
Brushed Aluminum Adapter Plate. To adapt Grant 5-Bolt wheels to 3-bolt Racing Quick Release (3073)
$26.95If you have a Grant 5 Bolt Steering wheel and want to adapt it to a 3 bolt style quick release, this is the adapter you need. Fits all Grant 5 Bolt Style Steering wheels. Learn More -
Toyota Rock Assault TC Pump Bracket for 20R, 22R, 22RE, 22RTE Engines (130501-1-KIT)
$47.70If you want to attach a TC Pump to your Toyota 20R, 22R, 22RE, or 22RTE Engine, this is the bracket you will need. Includes hardware to attach pump to bracket. This uses your factory hardware to attach bracket to the engine. Learn More -
4-Rib TC Pump Serpentine Pulley (130094-KIT)
$35.10We offer TC style power steering pump pulleys for both serpentine and v-belt style belts. All pulleys are precision CNC machined from 6061 T6 Aluminum and anodized red for a sharp look at will last for years to come. The center hole bore diameter is .660" and the total outside diameter of the pulley is 4 3/4". This serpentine belt fits 2.7 and 3.4 Tacoma applications and many other common serpentine belt applications that use a 4 rib belt. Learn More -
Weld On Steering Wheel Disconnect, 3/4" and 7/8" O.D. Shafts
Starting at: $26.10
Trail-Gear's weld on steering wheel disconnect uses a solid billet steel hex shaft that you weld over your existing steering shaft or steering column. Then you would bolt our billet aluminum quick disconnect unit to your steering wheel. This system allows you to quickly disconnect your steering wheel by simply pushing a button on the quick disconnect. Learn More -
Trail-Gear 1.200" TPF Taper Reamer for Toyota FJ80 Tie Rod Ends (130324-KIT)
$44.10This is the perfect taper reamer for reaming out Toyota and Suzuki pitman arms for the larger, more commonly used FJ80 tie rod ends, like the ones offered in our popular high steer kits. Our taper reamer is 1:10 (1" of taper for every 10" of length) and is also expressed as 1.200" TPF (1.200" of taper for every foot of length). The reamer is made from M2 high speed steel with a 1/2" shank diameter for drill press or mill and a 3/8" square end for use with a tap wrench. Anyone can use this tool. You simply ream out the hole in the pitman arm until you can slide the shank of the TRE in, tighten the castle nut, and install the cotter pin. It takes just a few minutes and can be done with hand tools. Learn More -
0.75" I.D., 1.25" O.D. Tubing 23MM Steering Rod Adapter Bungs
Starting at: $21.60
Low Range for several years have had available tie rod end bungs for 1" I.D. Tubing. These are for 0.75" I.D. Tubing, or 1.25", .25" Wall steering rods commonly found in Toyota and Suzuki High Steer and OTT systems. Learn More -
O.D. Tube Clamps
Starting at: $29.70
Trail-Gear O.D. Tube Clamps are ideal for suspension and steering brackets that you need attached to a section of tubing when you don’t want to weld the bracket directly to the tubing because adjustment or frequent removal of the bracket is needed. Learn More