Details
These are made to withstand a lot of abuse. Made from 1/4" Thick steel plate and CNC bent, they work great for any do-it-yourselfer trying to mount a trackbar or panhard bar to your frame.
-The length from the bottom of the frame to the center of the first hole is 2" and the second hole is 3.25".
-2 Holes so you can fine tune!
-Comes with small weld in gusset to make mount stronger. Works great with our 3/4" and 7/8" Rod End/Heim Joint Sets
-We recommend making sure your frame can take the abuse once welded. Plating the frame first is recommended to keep from tearing the steel away from your welds.
-Universal Fitment.
-MADE FOR ONLY 2" WIDE APPLICATIONS (WILL NOT WORK WITH CREEPER JOINTS OR JOHNNY JOINTS)
You may also be interested in the following product(s)
Trail-Link Three Front 3 Link Upper Link Axle Bracket
$30.40
|
Trail-Link Three Front 3 Link Upper Link Frame Bracket
$118.75
|
Toyota Upper Rear Axle 4 Link Bracket
$122.55
|
