For those tackling the top trails and hardest lines, a track bar helps improve traction and responsiveness of the suspension system on the trail. Low Range Off Road is your source for the mounts and parts to get it done! Learn More

Need an upper link bracket for your custom 4-link setup? Look no further, we sell them separate from the 4 link kit. Learn More

Our Rock Assault™ Front Three Link Pan Hard Bracket will allow you to use your current Toyota Trail-Link Three™ Front 3-Link Kit with your new Rock Assault™ Front Axle Housing. If you are ordering the Trail-Link Three™ Front 3-Link Kit at the same time as you are ordering the Rock Assault™ Front Axle Housing, simply choose the correct option for the Rock Assault™ Front Pan Hard Bracket, not the OEM axle pan hard bracket. Learn More

These steel reservoir mounts are great for securing a shock reservoir, fuel pump, fuel filter, or almost anything else that has an O.D. of 2” or 2-1/2”. They can be welded on to almost any size of round tubing.

 

Learn More

This is the Upper Link Frame Bracket that attaches to the passenger side of the frame. The link goes on the inside of the frame. Learn More

This is the Upper Link Axle Bracket that welds on the axle housing for the upper link to attach above the differential. Learn More

You will need this crossmember if you are looking to put your own kit together. It is designed to fit between a frame width of 36.69". These have been used on Toyota Pickups, but have also been used on other models with modifications. Please note that using this on many models will require gas tank modifications and use of the rear cargo bed. Heavy modification is needed to retain the use of pickup bed. Learn More

These are 20 Degree Lower Axle Link Brackets.  These are great for your own 4 Link Suspension setup.  Saves time and hassle in cutting your own tabs or bending your own steel.  Plus, they look great too! Learn More

Are you looking for a heavy duty offset panhard / track bar bracket that can be mounted to the front of your axle? These are a great bracket to do such at an amazing price. Learn More

This Weld-On Light Bar Kit is precision CNC bent from 1 3/4" x .120" wall, 1035 DOM tubing. The Trail-Gear Weld-On Light Bar makes a great edition to our stingerless bumpers, but can also be welded onto many different locations to mount and protect your lights. Learn More

These are shackles used for a variety of things. Most use them for traction bars on one end with a leaf spring vehicle. They have a 9/16" Hole and can be drilled out for a variety of uses. They make doing a custom job easier and building your stuff should be less expensive. Learn More

For those customers building buggies, Suzukis, and other vehicles using the Toyota gear driven T-case, we have your mounting solution! Because of the variety of vehicles and mounting restrictions, we have a solution to work from. Here it is! A very popular crossmember, but without outer "arms," bushings, or associated brackets. This provides you a base from which to build off of for those not-so-common buildups. The plate is still precision laser cut from 3/8" thick steel, and we provide the longer hardware needed to mount it to the case. Everything else is up to you! Learn More

In need of leaf spring hangers on your Samurai or doing a solid axle swap on your Sidekick using Samurai leaf springs? From the factory the shackle end is in the front on the Samurai. If you are doing a shackle reversal using Samurai springs, or if you are stretching the rear of a Samurai these may be needed if using Samurai leaf springs. These are the spring hangers to get the job done. The options are endless. These are to our specs because nothing else fits perfectly to the Samurai leaf spring and bushing width. Learn More

These are made to withstand a lot of abuse. Made from 1/4" Thick steel plate and CNC bent, they work great for any do-it-yourselfer trying to mount a trackbar or panhard bar to your frame. Learn More