High Pressure Fuel Pump for Fuel Injection Systems

Rating:
0% of 100
$149.00
Limited Stock!
SKU
SEU-FPHP

Swapping a 1.6L into your Samurai? You are going to need a fuel Pump. If you are keeping the fuel injection on your 1.6L you will need a high pressure pump.

Here is the pump we love to use on our Samurai builds. This pump has a max rating of 45 PSI and works well with 1.6 Fuel Injection.

 

Easy to Install: Two bolt installation plus the small size makes installation easy. For best results, mount the pump close to the fluid or fuel tank and below the liquid level.

Compatible with ALL FUELS: No rubber diaphragms or valves to swell or deteriorate in alcohol blended fuels.  Compatible with leaded and unleaded gasoline, diesel fuel, blended alcohol fuels and fuel additives.

Solid State Reliability: Proven on thousands of original equipment applications. No bearings, electrical contacts, or diaphragms to wear out or fatigue. Lasts four to five times longer than many other electric pumps.

 

  • Max 45 PSI and works well with 1.6L Fuel Injection.
  • Self Priming: The pump is self priming to 12 inches of fuel lift.  No extended cranking is necessary to restart engine after running out of fuel.
  • Quiet valve - 65Db• Integral fittings for 5/16 ID fuel hose or 1/8-27 NPT inserted hose fitting
  • ESD compliant to SAE J1113-13/EN61000-4-2• Radiated immunity - electric fields, SAE J1113-21 compliant
  • Radiated emissions, SAE J113-41 class 5 compliant
  • Conducted emissions, SAE J113-41 class 1 compliant
  • Can be applied to positive ground applications by connecting red lead to ground
  • Lower Power Requirements: Standard 12 volt models require approximately 1.5 amp at maximum delivery.
  • Built-in Pressure Relief: No flooding assures restarts on the hottest days.

Universal

If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, CA 93727.
  • Please place a clearly marked copy of the original invoice inside the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 Low Range Off-Road. All Rights Reserved.