Rock Defense Toyota Front Bumper
When it comes to protecting your truck DOM steel is far stronger and dent resistant when compared to HREW tubing. That's why every Trail-Gear Rock Defense tube bumper is made entirely out of DOM tubing (1.75" X .120 wall). Each bumper is carefully built on our jigs right here in Fresno CA.

Rock Defense bumpers are built using our winch mounting plate and feature a front 2" receiver. Mounting holes are drilled for most 5000-9500 model low profile winches and smaller sized 9.0R Warn competition winches. Bumpers mount to the factory holes on the front of 1984-1995 Toyota Pickup's and 4Runners.

Notes: Turn signal mounting tabs are not included. Unpainted steel finish. If using a winch with an integrated solenoid, such as the Warn 9500, trimming of the front plastic grill will be necessary. Will not work with roller type fairlead, requires hawse type fairlead. Not intended for use with a body lift.

Rock Defense Rear Bumper
These rear bumpers are some of the first in the industry that are constructed out of 100% DOM tubing. What is DOM? Check out a description HERE. The 1.75” OD X .120” wall thick DOM tubing will give you all the protection your 4Runner or Pickup needs while playing on the rocks. Available in four models that fit either 1984-1995 4Runner or 1984-1995 Pickup. The bumper is shipped unpainted and lightly oiled to prevent rusting during shipping.
Note: Optional Rear Bumper to Frame Support Kit will not work with 84-88 or 89-95 Pickup bumper.

Optional Rear Bumper to Frame Support Kit for 84-89 4Runner

This product is for the hardcore rock crawlers that need a little extra support for their rear bumper. This support welds to the bumper and can be welded or bolted to the frame for easy removal of the bumper. This product is shipped unpainted and lightly oiled to prevent rusting.

Front Bumper Winch Mount
If your looking at building your own front bumper this mount makes a great starting point. This winch mount bolts on to the six factory holes found on 1984-1988 Pickups and 1984-1989 4unners. 1984-1985 body style requires drilling two additional holes in plate. Made from 1/4" plate steel. Also fits 1989-1995 models at four attachment points. Two inch receiver tubing is also included. Plate is pre drilled for the 10" x 4.5" bolt pattern of the 5000-9500 low profile winches. Also includes holes for 9.0R Warn competition winch. Designed for use with steel or aluminum hawse fairlead. When building bumper, additional mounting points from bumper to frame are required if used for heavy winching. If using a winch with an integrated solenoid, such as the Warn 9500, trimming of the front plastic grill will be necessary. Unpainted finish.

ARB Winch Bars
ARB is world renowned for their front Bull Bar and Winch bumper systems. The design for the Toyota Pickup and 4Runner Bumpers are no exception. Safety, protection and function. Mounting to factory front bumper mounts and for extra rigidity, directly to the front of the frame. A great part of the bumpers are the driving light mounting tabs and tow points. Like everything else ARB does, the powder coating process is top notch. Each bumper is prepared first by shot blasting, priming with a zinc chromate, then sprayed with a strong black powder coat and oven cured providing a long, lasting maintenance-free finish. The ARB Winch Bars are winch ready and made to use with Warn XD9000, M8000, and M6000 and any other winch with same bolt pattern including most T-Max winches.

Note: Bull Bars ship truck freight and prices start at $75 to a commercial business address and $135 to a residential home address. Shopping cart will not be exactly correct on shipping price, please call or email for correct shipping cost.